Questions colored red are required
Inquiry Status:
How did you find this site?
Your Name:
Title:
Company:
Address:
City:
State:	Zip:
e-Mail:
Telephone:
Contact Preference:	E-Mail Telephone

2. Select Lockers

Frames vs. Openings

Locker quantities should be entered as frames. Each locker shown above represents one frame.

Locker Type	Select	Qty	Size (WxDxH)
Single Tier
Double Tier
Triple Tier

3. Base Condition

Option	Select
No Legs Lockers are typically specified with no legs when they are to sit directly on the floor, or are to be mounted on a wood or concrete base.
4" Legs Permanently welded to the bottom of the locker. The lockers can be anchored to the floor through the legs.
Channel Base A permanent integrated 4" channel base that encloses the front, sides, and rear. This base is welded to the locker.

4. Sloped Top Optionss

Option Click on the graphic to view a larger image	Select
Flat Tops Standard Configuration
Continuous Slope Hoods These fit over the flat tops on new or existing lockers. These tops provide a cleaner appearance than Unit Slope tops. Sloped Hoods are provided in 72" lengths, and cut to fit in the field. Sloped hoods are 18 ga., as opposed to 24 ga. for Unit Slope Tops or Slope Top Kits. Sloped Hoods rise 1/3 the depth of the locker plus 1", i.e.: 5" rise for 12" deep lockers.
A fully dimensioned drawing of the locker layout must be provided to price Continuous Slope Hoods.

5. Door and Ventilation Options

Options	Select
Delete Diamond Perforations In Door Remove the perforations in the door to allow more privacy. This is also required if adding one of the options below.
Mini Louvers Smaller louvers which provide ventilation and security without being able to view the contents. This requires the diamond perforations in the door to be eliminated. Selecting this option will omit the perforations on all doors.
Add Louvers Add louvers to the door of athletic lockers. This option requires the diamond perforations in the door to be omitted. Provides ventilation and more privacy. Selecting this option will omit the perforations on all doors.
Sound Dampening Panels (Requires deleting louvers) Sound dampening panels are welded to the inside of the locker door to reduce noise when doors are slammed shut. These panels may be used in any door 20" to 72" high.
Fire Extinguisher Door A Fire Extinguisher Door adds a cutout and glass panel to the locker door. Fire extinguisher is not included. This option may be used in single or double tier lockers that are 12" or 15" wide. If recessed handles are specified, the minimum width is 15". Selecting this option will delete the perforations only for these lockers.
Quantity of Fire Extinguisher Doors required
Waste Bin Door (Requires deleting louvers) The Waste Bin Door adds a cutout and hinged flap to the locker door. Waste receptacle for placement inside the locker is not included. Selecting this option will delete the perforations only for these lockers.
Quantity of Waste Bin Doors Required

6. Lock Options

Options	Select
No Locks
Flat Key Locks Inexpensive, simple lock for standard security Master keying optional
Grooved Key Locks Better security than flat key lock Master keying optional
Padlocks The most popular padlock for lockers Master keying optional
Master Keys Required
Number Of Master Keys

7. Locker Body Options

Option	Select
Center Partition Center Partitions are used to divide the space below the shelf in a single tier locker. A typical usage is where work clothes and street clothes need to be kept separate. Center Partitions are available for all depths of lockers from 12" to 24". If a hanger is to be used to hang clothes, the locker should be a minimum of 18" deep. You may also wish to add a coat rod for each side of this locker configuration.
Add Coat Rods Coat rods slip over coat rod hooks which are bolted to the side of the locker or center partition. Single tier lockers from 18" - 24" deep include a coat rod. All others only have coat hooks. When a coat rod is added, the standard double prong ceiling hook is deleted. If lockers are to have a center partition, the standard coat rod in an 18" - 24" deep locker will need to be replaced with smaller coat rods, and additional coat rod hooks.
Extra Shelf Single Tier Lockers come with one shelf positioned approximately 9" below the top. No other locker configurations include a shelf as a standard item. Extra shelves may be added to most lockers with this option. When ordering extra shelves, you will need to inform us of the locations of any extra shelves so that the sides may be punched with mounting holes as required.
Quantity of extra shelves per opening
Galvanized Bottom Galvanizing the bottoms adds extra corrosion resistance in damp environments.
Omit Diamond Perforations On All Side Panels Some people may prefer not to have the diamond perforations on the sides between lockers. This hides the contents of an adjacent locker.

8. Filler Panel Options

Option Click on a link for more information	Select
Vertical Filler Panels Used to fill the vertical space between lockers or between the lockers and a wall.
Flat Top Filler Panels Used to fill open spaces at the top of the lockers. Fillers are bolted, screwed, or riveted to the adjacent lockers. Flat top corner fillers will require wood blocking or other supports against the wall, which is not included.
Recessed Trim Used where lockers are recessed into the wall, and/or a soffit is placed above the lockers. When recessed trim is used, a gap must be left between the wall and the lockers, and between the soffit and the lockers. This gap should be no less than 1", and no greater than 2". Recessed trim extends 3/8" in front of the wall and the locker.
A fully dimensioned drawing of the locker layout must be provided to price filler panels and trim.

9. Paint Options

Option Click on an option for more information	Select
Standard Paint Electrostatically applied spray paint in 20 different colors. This paint is baked on at 350-400 degrees. Lockers are painted the same color inside and outside.
Powder Coat Paint Powder coat paint is an optional cost-effective way of improving the durability and rust resistance of steel lockers. Tests have shown that powder coat paints dramatically outperform the conventional liquid painted electro-galvanized steel in salt spray and impact tests. A 2 mil thick coating of powder coat enamel is applied by state-of-the-art equipment in an atmospherically controlled chamber, and is then baked at 400 degrees. This produces a thicker coating without runs or drips, and adheres better to the metal.
Two Tone Paint The lockers may be painted with the door frame being a contrasting color. Any of the standard colors may be used. All doors within a frame must be the same color.
Anti-Graffiti Paint (100 frames minimum order) Anti-Graffiti Paint provides a surface coating that allows the easy removal of graffiti and resists corrosion. This specially formulated powder coat paint finish has a tight molecular structure that seals the locker surface, preventing graffiti and corrosive agents from penetrating the finish.

Production Lockers

Production Lockers are manufactured to order, and take several weeks to be manufactured to order. You have the choice of all available options and colors.

All Welded lockers are not available for Quick Ship, they are available from production only.

Lead Times

Production lockers typically take 6-8 weeks to manufacture.

During the summer months delivery times can be 10-12 weeks when most schools are doing renovations and new construction.

We will advise the current lead times when we respond to your request for quote.

Material Handling Experts are a call away: 1-888-877-3861

Toll free 7-5 CST in the United States & Canada | Inquiries & Support

Laminated hardwood benches with a clear lacquer finish. The Heavy Duty Pedestal must be anchored to the floor. The Stainless Steel Pedestal does not require anchoring to the floor.
Option Click on an option for more information	Select	Qty
36"w x 9.5"d x 1.25" th.
48"w x 9.5"d x 1.25" th.
48"w x 12"d x 1.25" th. (ADA Compliant)
48"w x 24"d x 1.25" th. (ADA Compliant)
60"w x 9.5"d x 1.25" th.
72"w x 9.5"d x 1.25" th.
84"w x 9.5"d x 1.25" th.
96"w x 9.5"d x 1.25" th.
108"w x 9.5"d x 1.25" th.
120"w x 9.5"d x 1.25" th.
144"w x 9.5"d x 1.25" th.
H.D. Steel Tube Pedestal		--
Stainless Steel Pedestal		--
Other (Describe Below):

We can provide benches in other materials and custom sizes. Please describe your requirement in the the space provided above.

Catalog | Home | Newsletter | Blog

888-877-3861 Toll-Free Assistance

E-mail This Page

All Welded Athletic Lockers With Single Point Latching: Request For Quotation

1. Contact Information

2. Select Lockers

3. Base Condition

No Legs

4" Legs

Channel Base

4. Sloped Top Optionss

Flat Tops

Continuous Slope Hoods

5. Door and Ventilation Options

Delete Diamond Perforations In Door

Mini Louvers

Add Louvers

Fire Extinguisher Door

Waste Bin Door

6. Lock Options

No Locks

Flat Key Locks

Grooved Key Locks

Padlocks

Master Keys Required

Number Of Master Keys

7. Locker Body Options

Center Partition

Add Coat Rods

Extra Shelf

Galvanized Bottom

Omit Diamond Perforations On All Side Panels

8. Filler Panel Options

Option

Select

Vertical Filler Panels

Flat Top Filler Panels

Recessed Trim

9. Paint Options

Option

Select

Standard Paint

Powder Coat Paint

Two Tone Paint

Anti-Graffiti Paint

10. Locker Benches

Option

Select

Qty

Production Lockers

Lead Times

Offices: Dallas, Houston, San Antonio Texas | Little Rock, Arkansas | Oklahoma City & Tulsa, Oklahoma

Clients from California to New York, from Florida to Washington - U.S., Canada & Mexico

Cisco-Eagle is Employee Owned, Managed, and Operated | Site Map

888-877-3861
Toll-Free Assistance