Material Handling Experts

888-877-3861

Information on the products and techniques to better store, handle, and move products in your facility.

Conveyors and Falling Item Prevention

August 20, 2015

conveyor overhead system

Conveyors are often installed overhead or suspended from the ceiling to help conserve floor space or to interface with mezzanines or platforms. This  may create potential fall hazards. Loads can fall from inclined conveyors as they are conveyed up or down, or be subject to other factors that can cause a fall from any elevated line. Even on a floor mounted conveyor a spill can split a case, land on an order pickers’ toes, or damage inventory.

Read the rest of this entry »


This article is part of a series of articles on Falling Item Prevention. Click on a link below to view one of the other articles.
  1. Conveyors and Falling Item Prevention
  2. Falling Item Prevention for Pallet Racks
  3. Industrial Shelving: How To Prevent Collapses and Falling Products

Tags: , , ,
Posted in Conveyor, Material Handling, Product Ideas, Safety & Ergonomics, Warehousing| No Comments »

Seismic Zones and Pallet Rack: An Evolving Situation

August 12, 2015

2015-manufacturing

Is your facility in a seismic zone? Are you sure?

An increasing number of areas across the United States are demonstrating geological stresses and increased fault pressures that lead to earthquakes and smaller seismic events. So much more that our national seismic map was recently updated to include areas of the northeast and southern tier states not previously known for earthquakes, as well as enhanced zone classification in the inter-mountain west and known fault areas. Are you sure your pallet rack is correctly configured to withstand seismic ground forces?

Read the rest of this entry »

Tags: , , , , , , , , ,
Posted in Material Handling, Pallet Rack, Safety & Ergonomics, Warehousing| No Comments »

Industrial Shelving: How To Prevent Collapses and Falling Products

August 4, 2015

Industrial Shelving in a Warehouse

It’s common to store large amounts of inventory on industrial shelving. The diversity of that inventory–bins full of parts, boxes of varying weights, and other odd loads–can contribute to the dangers of falling product. Shelves are accessed frequently and by a variety of people, meaning that every time they are loaded, unloaded, picked or bumped, a spill could happen. A falling shelf load could cause worker injuries and of course ruin your inventory. What can you do about it?

Read the rest of this entry »


This article is part of a series of articles on Falling Item Prevention. Click on a link below to view one of the other articles.
  1. Conveyors and Falling Item Prevention
  2. Falling Item Prevention for Pallet Racks
  3. Industrial Shelving: How To Prevent Collapses and Falling Products

Tags: , , ,
Posted in Industrial Shelving, Order Picking & Fulfillment, Warehousing| No Comments »

Warehousing Optimization: Standards, Data and Time

July 28, 2015

warehouse operations

When it comes to warehousing operations, there are many ways to approach a continuous improvement project. You can automate, you can reorganize. You can employ a consultant. Three of the constant factors are time, standards, and data. Here are some insights on each of these important areas:

Read the rest of this entry »

Tags: , , , , ,
Posted in Docks & Shipping, Inventory Management, Order Picking & Fulfillment, Warehousing| No Comments »

White Paper: Pedestrian Safety in Forklift Operations

July 27, 2015

white paper cover - forklift safety

36% of forklift injury accidents involve pedestrians. That’s tens of thousands of accidents a year in the U.S. alone, a great many of them with direct bearing on pedestrians, who are at great risk. Due to the sheer mass of forklifts, they are particularly dangerous for pedestrians. Almost all these accidents result in serious injuries due to the mass and size of forklifts. Forklifts account for 1% of industrial accidents, but 10% of injuries. That statistic alone should put dealing with lift traffic and the ways it threatens walking employees, order pickers, and others a top priority.

Read the rest of this entry »

Tags: , ,
Posted in AisleCop, Docks & Shipping, Safety & Ergonomics, Warehousing| No Comments »

Register Today for the Texas Warehousing Resource Convention

July 16, 2015

warehouse system

A great way to spend a day for warehousing, distribution, manufacturing, safety and other industrial professionals.

It’s a quick, one-day conference, now on its 14th year, packed with education and networking opportunities. It’s an easy drive for anyone in North Texas. There will be more than 40 exhibitors (including Cisco-Eagle) in attendance to give you a chance to see the newest technologies and chat with industry leaders. (Big bonus: one of those exhibitors will be Cisco-Eagle!). Read the rest of this entry »

Tags: , , , ,
Posted in Manufacturing, Material Handling, News, Supply Chain, Warehousing| No Comments »

New Videos: Seegrid Vision-Guided Pallet & Tow Trucks

July 9, 2015

Seegrid Vision Guided Towing Tractor

We recently added several new videos. Seegrid manufactures vision-guided vehicles (tow trucks and pallet trucks) that help reduce wasted labor resources (travel time, in particular). These vehicles are reliable, safe and efficient in many kinds of material handling operations. Since they don’t require a driver, they reduce non-value add labor activities in a warehouse or manufacturing facility. Payloads travel from one value-add point (receiving, parts areas) to another (storage, workcells). Check out the videos below for more information.

Read the rest of this entry »

Posted in Automation, Robotics, Video, Warehousing| No Comments »

17 Expert Tips on Safety in the Workplace

July 7, 2015

warehouse workers in a rack row

Industrial workplace safety bears repetition and consistent reinforcement

For manufacturing and distribution operations, workplace safety doesn’t just protect workers—it optimizes productivity and helps drive revenue growth. It also helps protect company assets, reduces downtime, and increases morale. What can you do to protect your employees in picking, packing, material handling, assembly, maintenance and similar work? To answer this question, we spoke with leading manufacturers and distributors. Here’s what they had to say: Read the rest of this entry »

Tags: , , , ,
Posted in Manufacturing, Material Handling, ProMat, Safety & Ergonomics, Warehousing| 2 Comments »

Mobilizing Your Computer Stations for Operational Savings

June 30, 2015

Point of Sale Mobile Work Station

Reducing steps and wasted time

How many steps do your floor managers take going back and forth to the computer and print stations in the plant as they do their jobs? How much time does all that walking take over a year’s time? How much more work could be done if computers and printers could go where they do? If you’re managing materials going to and from storage, all that travel time is taking valuable people assets away from what should be their primary function. Read the rest of this entry »

Posted in Manufacturing, ROI, Warehousing, Workbenches & Stations| No Comments »

Hytrol Introduces New DCEZD-62, DCEZD-63, and a New End Drive for DC-62 Drag Chain Conveyors

June 1, 2015

pallet conveyors

Our partners at Hytrol Conveyors have introduced a couple of new upgrades to drag chain conveyors.

First, they are rolling out two new models, the DCEZ the DCEZD-62 and DCEZD-63 heavy duty drag chain pallet conveyors. These are 2-and-3-strand drag chain conveyors ideal for medium duty zero-pressure accumulation. They utilize Hytrol’s EZLogic® Accumulation System and EZDrive decentralized drive system for non-reversing applications. They’re also manufacturing a new end drive for the DC-62 and DC-63, the two-and three-strand drag chain conveyors designed to handle pallets.

Read the rest of this entry »

Posted in Conveyor, Material Handling, Warehousing| No Comments »