Warehousing is tough. Manufacturing is tough. Order fulfillment is tougher; the longer the operation runs the more difficult it can get.

You deal with constant disruptions , and the system you carefully designed a few years ago may not be working as well today, after changes in your business climate, personnel changes, SKU alterations, new lines, changing storage requirements, corporate policy changes, or issues with key suppliers or customers. These things happen, and at some point, all or most of them will occur in every operation. If a series of small changes have added up to big headaches, what can you do?

Read the rest of this entry »

In dynamic distribution environments, accurate, fast weighing, counting, and dimensioning systems are more important than ever. This is particularly true in 3PL’s and other operations where needs often change. Getting it right, and getting it quickly has become increasingly more important. One way is to utilize the newer mobile weighing systems on the market today.

Read the rest of this entry »

Pallet racks take a beating over time. They get loaded with exceptionally heavy pallets, by exceptionally powerful lift trucks over and over throughout the course of years. Chances are that if you have pallet rack in your warehouse, it’ll get hit at some point. When it does, inspecting (and generally replacing) it is your best course of action. But what about avoiding that hit, or its dangerous aftermaths in the first place?

Rack is easy to ignore from a safety standpoint. In fact, it’s too easy. Other hazards might stick out like a sore thumb, so there are times plant managers or warehouse supervisors can be less concerned than they should for hundreds of tons of racks and load in a warehouse bustling workers and lift trucks.

Here are some ways to avoid (or minimize) lift truck/rack impacts…

Read the rest of this entry »

As interest continues to grow in automated palletizing, let’s take a brief look at a few of the issues surrounding these applications.

Over the next couple of months, I’ll be providing a handful of blog postings relative to palletizers. We will begin with what is driving the growth in the use of these products, then a look at basic systems, cost estimates, what you can expect from a properly applied palletizer system, and then share specifics from a couple of actual implementations in distribution centers.If you are experienced in palletizer systems, you will likely be familiar with much of what is covered here. If you are new to palletizing, or considering your first system, hopefully this information will help you understand what the issues are and how you can navigate them.

Read the rest of this entry »

When you’re working on a mezzanine (or work platform) project, you may be provided P.E. seals and calculations. Here’s why you will get these elements…

What are P.E. Seals and Calcs?

• Calculations are a hard copy document of the checks of the mezzanine structural components
• Seals are a stamp placed on the calculations and drawings certifying that a state registered Professional Engineer (P.E.) has made or reviewed them

Who & Why might you need them?

• To obtain building permits municipalities may require them
• Required by municipality plan checkers to review for code compliance
• The end user may require them to certify review of the structure
• Some companies require them for their records

What is included?

• 3 copies of the drawings and calculations (normal)
• All with a P.E. seal for the state that the mezzanine will be installed

Here’s a figure you can relate to: labor is typically about 65% of the operating costs of the average warehouse according to this article in the May 2008 issue of Inbound Logistics. On top of that, 20% of your warehouse workers describe themselves as “disengaged” from the process. Sobering enough to think about, if your business depends on storing, stocking, shipping and receiving to please customers.

The first thing I think of when I see those kinds of numbers is that the cost of labor in a warehouse isn’t something that must stay at 65%. Sure, we all understand that the cost of people in any operation will be at or near the top of your cost lists. Warehouses aren’t special in that regard. The problem is one of productivity per worker. Due to computerization, offices have seen excellent per-employee productivity gains the last twenty years. Some of that has translated to the warehouse or plant floor, but certainly the revolution that has swept the office hasn’t translated entirely to, say, a picking and shipping department. WMS has come for some, sortation systems for others, and those things have made a difference in companies like Robroy who have deployed them correctly.

Read the rest of this entry »

Walk into any order fulfillment operation, and you’re probably going to see gravity flow rack.

The reason is obvious–it’s one of the best ways to pick orders utilizing first-in, first-out principles. It used to be that there was one kind of the stuff, the plastic-wheel tracks, but these days the choices are more diverse than ever. For the most part, these flow rack types act the same; they decline toward the picker and boxes or totes or even larger components flow toward him. They’re restocked from the rear and picked from the front onto a takeaway conveyor line, a cart, workstation, or another step in the process.

Read the rest of this entry »

Something we often recommend to save space for our clients is modular drawer storage — for certain operations, in particular those with components, assorted small parts, hardware, or even tool storage, we’re talking about recouping 50% -70% of floor space. Once people have ‘em, they love ‘em.

But there is more than one way to skin that cat. You can configure different kinds of cabinets to do different jobs. There are hundreds of possible combinations of drawer styles and sizes. Another wrinkle is what happens when you can merge the drawers with steel shelving. It can be new, it can be some you are already using. It begs the question: when is it better to have a cabinet, and when is it better to use shelving and compartmentalized drawer inserts?

Read the rest of this entry »

Just a few ways to improve your operation as the heat of summer approaches. There are many issues of productivity and safety that are stressed as the heat rises. As temperatures start to rise, it gets particularly hot in industrial facilities, warehouses, shops, and distribution centers where air conditioning isn’t always present, extremely costly, or always effective. Experts say that employee productivity increases when ambient temperatures are comfortable and plummets when they aren’t. Error rates are forced up, safety is reduced as workers fight through hot, sweaty conditions.

Cool down the facility with HVLS fans: If you can’t air-condition, or can’t adequately do so, there are methods that can cool large amounts of square footage for relatively low costs. Floor fans are all right for specific areas, but they suffer from their high volume. One of the most productive methods is to employ high volume, low speed fans. Warehouses have very high ceilings and vast spaces that are often reconfigured when stock and materials change. Warehouses and distribution centers face ongoing temperature control battles during the summer months, with or without air conditioning.

Read the rest of this entry »

Steel prices and fuel prices are headed nowhere but up in the coming months.

Price increases and surcharges have become commonplace, driven by increased steel costs and skyrocketing fuel prices. We look around and see manufacturers issuing price increases, steel surcharges and fees on a weekly basis. It’s industry-wide and it’s being driven by international demand and also some commodities market issues. We have seen manufacturers decline to provide a price - orders are priced at shipment. This is reminiscent of the 1970’s, and it’s welcome by absolutely nobody who runs an industrial facility or deals in material handling equipment.

Read the rest of this entry »