From a total of 39,324 inspections last year, the Occupational Safety and Health Administration (OSHA) found 88,846 violations. For warehousers, distributors and manufacturers, the list is familiar.
We’ve added a series of drawings from Steel King that detail out the critical dimensions for various kinds of pallet rack, ranging from selective to drive-in, to over-door pallet storage racks. It’s a small PDF file (just 368 KB) that shows front and side views of various rack types and the things needed to correctly specify them. It’s easy to print and has some other links to useful pallet rack information and web pages.
Check it out. If you’re working on a rack project, it’s one more tool you can put to fast use.
While there are dozens and dozens of shelving manufacturers and even more variations of trade names for them, there are really just three basic kinds of industrial shelving manufactured and broadly used — Rivet-Type, Steel Clip, and Wire. Of course, there are more variations of these shelving types than you can imagine, but most shelving boils down to these kinds. You can also consider bulk rack as “shelving”, but we have found that heavy duty rivet shelving often fulfills the roles it has typically filled.
A quick note: Cisco-Eagle is a sponsor of the University of Arkansas RFID Research center. We’ve been involved with the center since its 2005 inception. I’ve visited the center a number of times, and have seen the innovative work that’s being done.
The center continues to excel with this study on the effect of RFID technology on inventory accuracy.
The study confirms that RFID can have a significant positive effect on retail inventory accuracy. For players like Wal-Mart, this means millions of dollars in savings. A preliminary analysis demonstrated that an automated, RFID-enabled inventory system improved accuracy by about 13% in test stores compared to control stores.
Left: Pflow Regional Manager Chuck Cobb .
Right: Cisco-Eagle Houston Market Manager Jason Eitreim
Pflow Industries (pronounced “flow”, by the way) recently recognized Cisco-Eagle as a top distributor of its vertical reciprocating conveyor and other lift products. Pflow Southeast Regional Manager Chuck Cobb presented the awards to our President, Steve Strifler, and to Houston Market Manager Jason Eitreim. (more…)
Last night I while watching the news on TV, I saw a story on the cost of diesel fuel. Where I live I understand that diesel fuel runs about 60-80 cents more per gallon than what I pay now for unleaded. The news story showed a trucker filling his tank, and the total bill came in around $600!
The story cited the rising cost of oil and increasing demand for diesel in other countries as contributing factors to the rising prices. I am sure that the current value of our dollar has also affected the price at the pump.
Those increasing fuel prices affect the delivery cost of capital equipment. Most freight companies add a fuel surcharge to the cost of delivery. As the price of fuel fluctuates, they adjust fuel surcharges accordingly. One freight company we work with adjusts their surcharges weekly. (more…)
It’s safe to say that there is shelving of some kind in almost every warehousing operation. Even a sophisticated distribution center usually has some fallback storage in the form of rack, shelving or other storage. For those applications that require a lot of heavy-duty shelving, though, issues of capacity come to the forefront.
A few years back, we had a customer who asked us to quote a good amount of rivet shelving (you might call it particle board, boltless, or by a brand like Riveteer or Penco’s Rivet Rite). It was a good sized project and that customer ended up buying it used from another company. He was happy with it right up until it collapsed and dumped hundreds of bins of aerospace components to the floor. The problem? He was storing something very heavy on either a shelf or on a post that couldn’t handle it. Once one of the shelves buckled, it set off a chain reaction that was kind of like dominoes and a whole lot of shelves went down. The components were similar looking, except for sizes, and it was pretty much a total loss.
Are you ready for 2004 all over again? the roller coaster ride of rising steel prices and surcharges may be on its way back.
According to the Milwaukee Journal Sentinel, steel prices are rising amid tightened supplies and robust overseas demand. For industrial and warehousing operators (and for material handling companies like us) the implications are obvious: prices are going to increase and they are going to be volatile in 2008. According to the Journal, “The worst-case scenario could be a repeat of 2004, when manufacturers of many products, from automobiles to washing machines, faced severe steel shortages and record-high prices.” The price of hot-rolled steel has increased about 6% in the past two weeks. There is about a 3-month supply of steel remaining, and shortages are predicted.
The takeaway: if you’re considering a large capital project like a conveyor or rack system that utilizes lots of steel, the time to pull the trigger is probably now, not later, to avoid a large hit on escalating steel prices.
The big news out of Washington the last couple of months has been on the tax rebate part of economic stimulus. What may have more impact on the economy, and will certainly have more impact on people in the warehousing or manufacturing business, are the business tax breaks that quietly came along with it. We’ll break them down into two primary areas…
The National Crime Insurance Bureau estimates that over $1 billion of construction tools and equipment is stolen every year. Of course, if you’ve ever run a construction or renovation site, a large maintenance concern, a tool crib, or other industrial job site where plenty of valuable tools are there for the taking, that won’t surprise you in the slightest.
Everyone from Airline maintenance mechanics to assembly and maintenance techs face the problem. The loss of equipment & tools, the productivity dumps, and the climate of dishonesty they create are all drains on efficiency and profitability for just about every commercial operation. we’ve always said that half the security battle is in the storage methods; security begins with the way things are stored. It cannot be an afterthought…
