Material Handling Experts

888-877-3861

Information on the products and techniques to better store, handle, and move products in your facility.

Questions to Ask: Carousel Picking Systems

October 28, 2014

horizontal carousels

Carousels are a high performance order picking technology option, but only if you match them to the right operational needs and applications. If you are considering a carousel system for your operation, it’s important to understand when these “goods to person” picking systems are appropriate, and where manual picking might still work better for you. The real issue is, can you make a carousel, or any automated solution, outperform a good manual system?

The answer is: not always. Let’s look at ways you can push your project in the right direction.

Read the rest of this entry »

Tags: ,
Posted in Automation, Inventory Management, Order Picking & Fulfillment| No Comments »

How Flow Rail Systems Improve Drive-In Racks

October 17, 2014

drive in application converted with flow rail

Drive-in rack is one of the best high-density pallet storage methods available, but it’s always had some drawbacks:

  • Forklift damage within the lane is always a possibility as drivers must drive in, then back out inside the rack structure
  • Since there must be driving space, drive-in racks lack lateral braces, which make them somewhat more vulnerable to collapse if struck
  • Driving into and out of that rack structure also takes time
  • Drive-in racks allow you to store only one SKU per bay
  • Drive-in structures are typically 30 to 40% empty at any given time

Now there is a way to get the benefits of drive-in rack – dense storage through deep lanes – without the dangers inherent with driving into the rack space.

Read the rest of this entry »


This article is part of a series of articles on Flow Rail. Click on a link below to view one of the other articles.
  1. How Flow Rail Systems Improve Drive-In Racks
  2. How Flow Rail Helps Reclaim Storage Space In Push-Back Rack
  3. High Density Pallet Storage Racks: Comparing Pushback, Drive-In, and Flow Rail

Tags: , , , , , ,
Posted in Material Handling, Order Picking & Fulfillment, Pallet Rack, Space Saving, Warehousing| No Comments »

Saving Space in Rack Storage Areas

December 3, 2010

pallet rack rows

Pallet rack storage is relatively inexpensive and extremely common. In many facilities, it also consumes the majority of square footage. When you can cut down on this space, significant gains can be made that allow you to use the square footage for other purposes. Here are some ideas for reducing your rack storage footprint while maintaining storage capacity.
Read the rest of this entry »

Tags: , ,
Posted in Material Handling, Order Picking & Fulfillment, Pallet Rack, ROI, Space Saving, Warehousing| No Comments »

Getting the Load Right for your Pushback Rack

October 12, 2009

pushback rack applicaiton

Push back rack systems are excellent high density storage solutions — perhaps the most economical way to squeeze space out of a crowded warehouse.  All loads are stored and retrieved from the same aisle. This reduces the number of aisles needed in a facility, freeing up more space for storage. Aisles can take a great deal of space up in a typical warehouse, so by implementing a pushback pallet rack system, you essentially swap selectivity for space. Push back rack systems provide a Last-In-First-Out (LIFO) inventory rotation, so you have to be certain your load fits. If it does, congratulations — you’ve just saved a lot of space. But there are issues that can arise when pushback rack is inappropriately specified or utilized. Here are some of those…

Read the rest of this entry »

Tags: , , , , , , ,
Posted in Docks & Shipping, Material Handling, Pallet Rack, Safety & Ergonomics, Space Saving, Warehousing| No Comments »