75 Series Kingpinless Casters, Standard Top Plate

75 Series casters are for the heaviest loads in the most demanding applications


OAH: 7-1/2"	OAH: 10-1/8"	OAH: 11-1/2"

These are large, high-capacity casters, with wheels up to 3" wide and overall heights to 11-1/2". Patented Kingpinless design means that they will swivel better (even under massive loads) and last longer. Casters are finished in Laguna blue paint, and available in multiple wheel options.

Cast Iron

Cast Iron Wheels are exceptionally long wearing, have tremendous resistance to shock, and are a good choice for high capacity loads in warehousing and manufacturing. Recommended for rough concrete, wood block, and littered floors.

Forged Steel

Forged steel wheels provide maximum strength and durability—even under a load as heavy as 10,000 pounds. They are virtually indestructible within their capacity range. Use them in the toughest applications and on the most demanding floors, with the heaviest loads.

Omega

The Omega wheel can eliminate the need for spring casters. It achieves its high capacities and enhanced impact-absorbing ability with a patented web/spoke design. It flexes to cushion the load then rebounds to original shape. Resists tearing and chunking, and won't pick up metal chips.

Phenolic

Phenolic wheels (also called Durastan) provide excellent service even in wet and cold applications. They resist degradation, deterioration, and corrosion from oil, grease, and commonly used acids and solvents. Recommended for all types of floors except resilient tiles.

Rubber on Iron

Also known as mold-on rubber, the rubber on iron wheel is floor-protective, provides long tread life, operates quietly, and is highly resilient. Suggest for almost all kinds of floors and for a variety of applications. It's well-suited for towline applications of the kind often found in freight terminals or warehouses.

Solid Urethane

Solid Urethane Wheels are designed primarily for applications involving high moisture. Injection-molded urethane, the urethane solid wheel provides extended service in moisture applications that normally destroy conventionally bonded wheels.

Urethane on Iron

Capacities rival those of steel wheels. Careful attention is paid during the bonding process to assure that each wheel meets high performance standards. UI wheels are non-marking, and resistant to abrasion, chemicals, and oil. These wheels will typically outlast rubber wheels.

V-Groove Iron

V-Groove wheels are machined with a 90 degree groove for operation on inverted angle iron track. They are used to control the flow of a load (into an oven, between machines, over long distances, or where "production line" sequences must be maintained.)