45 Series Industrial Casters

Choose a wheel type for your rig

  • Full double ball bearing swivel raceways
  • Hardened swivel bearing  raceways
  • Kingpin diameter 5/8"
  • Mounting plate and leg thickness 1/4"
  • Lube fittings for swivel bearings
  • Lube fittings for all wheel roller bearings
  • Axle diameter 1/2"
40 Series casters can also be fitted as needed with swivel locks, brakes, or other accessories to fit your application. 40 Series casters can be used in a number of industrial applications.

Quick Reference Chart - Which wheel material should you use for your floor surface?

category blue arrowCast Iron

Cast Iron Wheels are exceptionally long wearing, have tremendous resistance to shock, and are a good choice for high capacity loads in warehousing and manufacturing. Recommended for rough concrete, wood block, and littered floors.

category blue arrowPerformance TPR

Performance TPR wheel provides unsurpassed durability and reliability. It combines the durability of a hard-tread wheel with the quiet floor protection of a soft-tread wheel. It’s made of thermoplastic elastomer, permanently bonded to a polypropylene core. It will not mark floors. It is resistant to chemicals, acids, bases, alcohols, salts, and steam.

category blue arrowPhenolic

Phenolic wheels (also called Durastan) provide excellent service even in wet and cold applications. They resist degradation, deterioration, and corrosion from oil, grease, and commonly used acids and solvents. Recommended for all types of floors except resilient tiles.

category blue arrowPinnacle

Pinnacle Wheel is an ultra-tough thermoplastic non-marking wheel. It is extremely durable, deflects floor debris and has high impact resistance. This wheel rolls easily with heavy loads and requires less force to roll and swivel than other hard tread wheels. Extremely resistant to water, most chemicals, solvents, salts and steam cleaning.

category blue arrowPolyolefin

Superior resistance to water and chemicals, better abrasion resistance than hard rubber, and a remarkable ability to withstand impact. Ideal uses include bakeries, meat packers, dairy, food processors, laundries, supermarkets, warehouses, and manufacturing facilities.

category blue arrowRubber on Iron

Also known as mold-on rubber, the rubber on iron wheel  is floor-protective, provides long tread life, operates quietly, and is highly resilient. Suggest for almost all kinds of floors and for a variety of applications. It's well-suited for towline applications of the kind often found in freight terminals or warehouses.

category blue arrowSignature

The Signature Wheel has a lightweight, reinforced nylon core with a high strength non-marking elastomeric rubber tread. The round tread provides easy rolling. Our durable nylon core is six times stronger than polypropylene. The performance rubber tread is cut, tear and corrosion resistant and will not chunk out. It has the highest strength-to-weight ratio than any other wheel in the industry.

category blue arrowUrethane on Iron

Capacities rival those of steel wheels. Careful attention is paid during the bonding process to assure that each wheel meets high performance standards. UI wheels are non-marking, and resistant to abrasion, chemicals, and oil. These wheels will typically outlast rubber wheels.

category blue arrowUrethane on Plastic

Mechanical bond eliminates bond separation due to wet conditions. Tread material is 95 Durometer Shore A and provides excellent rollability with a non-marking compound. Provides a smooth ride over rough surfaces. Excellent for wet applications and caustic surfaces.