• Returns Policy
• Shipping Policy
• FAQ

Woven Wire Partitions

10 ga. wire woven into a 2"x1" mesh, and welded to an angle iron frame. These panels bolt to 2"x2" square posts. The components are easily assembled to construct tool cribs, secure storage, or to close off part of a room. Available with hinged and sliding doors in a large number of sizes and configurations.

Welded Wire Partitions

Ten gauge horizontal wires are placed in a 2" x 2" center to center square mesh. Where the wires intersect, they are welded together. The ends of the wire are securely welded on all four sides to a 1-1/4" x 1-1/4" x 1/8" 13 ga. roll formed angle. The panels attach to 2" x 2" posts with clips and self tapping screws. This configuration makes it easy to drop in panels and are easily assembled into secure storage areas, or to divide a room. These partitions are available with hinged or sliding doors.

Dock Door Security Cages

Restrict access to your warehouse by securing dock-side personnel doors. Driver security cages provide a secure waiting area for deliverymen, truck drivers, service crews, and other visitors. Partitions are built with high-strength welded wire mesh for complete security.

Prisoner Holding Cells

From local to state and federal law enforcements agencies as well as the military, these holding cells offer a great solution to a temporary or even permanent minimum security holding facility. They are even perfect for any large event where detention might be needed.

DEA Storage Cages

DEA Storage Cages can help solve many of the special problems for drug manufacturers, distributors, and wholesalers face when it comes to regulations or in-plant security of Scheduled III, IV, and V controlled substances: as outlined in Title 21 CFR Sections1301:72-1301.76 physical security controls. Enclosures are secure: hardware is inaccessible from outside the partition. 3/8" assembly hardware is the heaviest in the industry.

More Wire Partitions & Enclosures Information...

Wire enclosures & security cages allow you to choose the size and gate type that best fit your application. Panels bolt directly to support posts, which are set on maximum 10'-2" centers. Installation is faster than competitive wire enclosures. The design utilizes fewer total parts, making installation quicker and less complex. They're based on the concept of 4' or 5' high panels stacked one on top of the other between tubular posts to reach desired partition height. Enclosures are secure, as hardware is inaccessible from the outside of the partition. 3/8" assembly hardware is the heaviest in the industry. Each model listed includes posts, panels, gate with cylinder lock, assembly hardware, and floor anchors. Straight lines and clean exterior makes a handsome finishing touch to your storage area.

Utilize wire mesh cages and partitions for security areas, to prevent pilferage, to enclose work areas, and to create customized, accessible security areas in warehouses, manufacturing facilities, and distribution centers. Great for stock rooms and other secure locations.

Panels install horizontally, between tubular posts. The panels are four or five feet tall, have lengths of one to ten feet (other sizes are available). Two or more panels are stacked to reach full partition height. Posts are 8'5" and 10'5" lengths, and are available for any height partition, up to 40'.

Wire mesh wall and ceiling panels are interchangeable...totally modular. This feature simplifies relocation and layout changes.

Partitions are built with durable 3/8" hardware. Once installed, the hardware is not accessible from the exterior. Furthermore, the panel's all welded construction, combined with the posts welded base plates, provide unequaled strength and security.