Low Profile Span Track Carton Flow

Carton flow track transforms pallet rack into flow racks

Carton flow track sits between beams, with the roller profile below the beam, making the front beam a carton stop
This is an excellent choice to maximize vertical space, since the track itself takes up little or no top-to-bottom space
Lengths between 36" and 144" available
Drop-in design for easy, tool-free addition to pallet racks
Requires front and rear beam hangers, which install easily and without tools - front hanger acts as an end stop while the rear hanger absorbs shock of impact loading

9" Wide

9" wide Low Profile Span Track has a maximum carton width 13-1/2”. (9" is roller width; add 3/4" for actual width)

12" Wide

12" wide Low Profile Span Track has a maximum carton width 18”. (12" is roller width; add 3/4" for actual width)

Beam Hangers

Hangers must be purchased for the front and rear load beams to attach Low Profile Tracks to pallet racks. We can assist you in specifying the correct hanger for your racks.

Choose the depth range for your rack based on Between-Beam Dimension, which is the level distance between the innermost portion of the front and rear load beam.

2 Hangers (one front and one back) must be ordered with each track. Due to manufacturing considerations, a minimum order of four tracks is required for most situations.

Installs between pallet rack beams with simple hangers - takes one worker, two steps and no tools.
Front and rear hangers available for structural, formed and step beams
Between rack installation saves vertical space
Drop-in design allows for easy addition to existing rack - without tools
Special hangers are also available, give us a call with your requirements
Front hanger acts as a front end stop
Rear hanger on beam absorbs shock of impact loading
Both ends feature 1-1/2" label holders built into hangers
Full-width rollers provide total carton support and consistent carton flow

Further Reading - Low Profile Carton Flow Track


Low Profile Specifications
Product Capacity:	Up to 50 lbs./ft. See individual models for details.
Track Widths:	We offer 9" and 12" online, but you can contact us for 6" and 15" widths. All widths are nominal (add 3/4" for actual).
Track Lengths:	Unsupported spans from 4’ to 10’ in 1" increments. We offer a limited range of priced tracks, but custom sizes are available. Contact us for more information.
Roller Centers:	We offer 2" & 3". 1" available for special request
Adjustability:	Fully adjustable left and right
Label Holders:	1-1/2" holders are built into hangers