High Profile Carton Flow Track

Installs atop rack beams for smooth carton flow

  • High profile flow lanesInstalls atop pallet rack beams; can overhang the front or back to maximize linear space utilization
  • Connects to beams with a retainer angle & lock arm; 2 angles required for each flow level
  • Typically used in loose-pick applications or where contouring is preferred
  • Full-width rollers provide total carton support and consistent carton flow
  • Rollers are 3/4” diameter aluminum - they eliminate flimsy plastic wheel tracks, reducing replacement and maintenance costs

category blue arrow9" Wide

9" Wide Rollers - actual width is 3/4" wider. Maximum carton width is 13-1/2"

category blue arrow12" Wide

12" Wide Rollers - actual width is 3/4" wider. Maximum carton width is 1

category blue arrowRetainer Angles

14-gauge galvanized member attaches to the full length of the front and rear beams. Lock Arm flips over to secure Span-Track into position in all three planes. This simple open/lock feature enables one person to easily change, modify or relocate track without tools. Track can be adjusted front to back, left to right, and can be positioned flush or overhanging.

Deck Style Span Track Information

No more plastic wheel failure

Plastic roller wheels can be expensive to maintain and replace. Downtime is a problem. Unex Span Track eliminates the problem by eliminating the wheels and replacing them with ultra-reliable, rugged duty aluminum rollers. This eliminates the high cost of replacing damaged plastic wheel tracks. Add to that the versatility of being able to change a single shelf in a single bay of pallet rack into flow storage, and you can configure a reliable flow module "on the fly" that will last years.

 

High Profile Specifications

  • Product Capacity: Up to 50 lbs./ft.
  • Track Widths: 6", 9", 12" and 15" (actual track width is 3/4" greater than nominal)
  • Track Lengths: Unsupported spans from 4' to 10' in 1" increments
  • Roller Centers: 1", 2", & 3"
  • Adjustability: 1-1/2" O.C. left and right. 2" O.C. front and back
  • Label Holders: Built into track ends (2")

Knuckled End

Knuckled Ends are available as a high profile section with a 15-degree tilted front end. Since this angles the carton toward the picker, visibility and accessibility are improved, making it ideal for loose pick applications. The knuckled section is available in three lengths and does not add to overall track length.

Knuckle Length 12", 16", 20"

Max. Carton Length 15", 20", 25"