Slider Bed Belt Conveyor: Hytrol Model SB

Easily create longer runs of belt conveyor

Belt Conveyor Inquiries - or call us toll-free for expert assistance

Belt conveyor width is measured 2 ways: belt and overall (bed) width. The frame extends 3" on either side of the belt
Belt widths are 6" less than bed widths
Lengths from 6' to 100' listed, but many other sizes available
Configuration assistance is just a call away

The Model SB is a slider bed conveyor designed with channel frames and bolt in pans. Frame design makes it ideal for matching up with roller bed conveyors. Model SB slider bed conveyors have a channeled frame equipped with a single transition roller on the end of the conveyor bed. By having a belt slightly shorter than the frame, and adding the roller on the end, this conveyor is able to bolt directly to other conveyor frames. This built-in transition makes it easier for you to create long runs of conveyor without having to resize belts or add additional intermediate transition sections. Also standard on the Model SB is a center drive, making the conveyor direction reversible at no extra cost.

Model SB Conveyor Specifications 175 KB PDF, opens a new window

Bed - 6-1/2" x 12 ga. formed steel channel powder painted with galvanized bed pans
Overall Frame Widths:16", 18", 20", 22", 24", 26", 28", 30", 34", 36", 40", 42", 48", & 54"
Center Drive (standard)
Motor - 1/2 HP standard-3/4 HP to 2 HP Available
Adjustable Floor Supports Available
Capacity - Maximum load per linear ft. of conveyor 100 lbs., not to exceed rated capacities
This conveyor is reversible