4-Side cells are completely stand-alone units that offer a secure space anywhere in your facility that they will physically fit. The walls do not require connections to existing facility walls because it is completely freestanding. The door on these cages are mounted on the center panel at the end of your partition, but other configurations are available. These cells are configured with posts.
3-Side cells fit against a single building wall, providing a secure area utilizing one building walls and three wire mesh walls. The door on these cages are mounted on the center panel at the end of your partition, but other configurations are available. Your facility wall must be able to accommodate wall or ceiling panels to utilize a 3-sided partition without at-wall post connections. These cells are configured with posts.
Holding cell specifications
Ideal for prisoner holding cells, jails, police stations, campus security offices, correctional/detention centers, airports, public arenas, fairgrounds, and other areas where detainees must be held
Heavy-duty construction and smart design prevents access to hardware from the inside of the enclosure
Easy installation, reconfiguration, and complete versatility to change layout and use existing partitions
Open but secure design allows for free circulation of existing lighting, HVAC, and fire suppression systems
Heavy duty options available for facilities requiring higher security levels
Your facility wall must be able to accommodate wall or ceiling panels to utilize 2 or 3 sided partitions without at- wall post connections. 4-wall partitions are freestanding and do not need to be anchored to a building wall.
the wall are recommended for dry wall, gypsum, or metal walls. Panels may
connect directly to masonry, block, and some wood walls without additional
posts. Adding posts at the wall will increase the price of your partition. We
can help you ensure you get the right configuration when you order.
Partitions are designed to be anchored into a concrete floor. If your floor is
uneven, or a surface that cannot hold anchors, contact us. Partitions can be
installed on most any floor that can bear their weight, but we can help you
avoid problems with your floor surface.
footplates may be required for certain seismic zone areas. If you are in one of
these areas, please let us know so we can configure your partition correctly.
This may result in a pricing adjustment.
provide you with a complete layout, price and analysis based on your needs.
Contact customer service for fast assistance.
Heavy Duty Options
The system standards may be upgraded with any of the following:
Heavier 1-1/2" x 1-1/2" 8 gauge woven wire mesh.
Tamperproof assembly hardware.
Larger 1-1/2" x 1-1/2" x1/8" steel angle panel frames.
Standard mortise cylinder lock, a self-locking device with spring action tongue,
can be used in many applications. We also offer a dead bolt style lock, and a
high security totally concealed self-locking/ dead bolt lock. Top and bottom
slide bolts may be also added to the door. Customer specified locks may be
integrated into the system as well.
10-gauge steel benches may be added to the cell or purchased separately. An
optional 1" diameter handcuff rail may be added for prisoner lockdown. A 1"
diameter steel pipe may be added to the bench for
prisoner lockdown (pictured right). The pipe is securely welded on both ends and
centered 2-1/2" from the face side of the bench. If a full-length rail is not
desired, single forged steel eyelets can be placed at customer specified
positions along the face of the bench.