Pallet Rack Backing - Wire Mesh Safety Guards

Bolts directly to teardrop pallet rack frames to prevent product spillage

  • Panels bolt directly to teardrop pallet rack uprights - for non-teardrop racks, consult us
  • Protects employees by making sure nothing can fall when pushed by a lift truck or if a pallet breaks
  • Wire barriers can be ordered flush or offset to allow pallet overhang; just specify when you order flush or overhang, and the amount of overhang needed
  • Constructed from 2" x 2", 10-gauge welded wire mesh and securely welded into a 1-1/4" x 1-1/4" x 1/8" angle frame
  • Order to match beam width; wire panels are around 6" narrower to fit between posts. Specify the height dimension by matching it to the same height of your rack frame


Model No. Height (Ft.) Width (Ft.) Price
RW-RackBack8x8 8' 8' $357.31 
RW-RackBack9x8 8' 9' $379.25 
RW-RackBack10x8 8' 10' $404.33 
RW-RackBack8x10 10' 8' $404.33 
RW-RackBack9x10 10' 9' $420.00 
RW-RackBack10x10 10' 10' $438.81 
RW-RackBack8x12 12' 8' $487.39 
RW-RackBack9x12 12' 9' $520.30 
RW-RackBack10x12 12' 10' $637.84 
RW-RackBack8x14 14' 8' $532.84 
RW-RackBack9x14 14' 9' $561.04 
RW-RackBack10x14 14' 10' $587.69 
RW-RackBack8x16 16' 8' $617.46 
RW-RackBack9x16 16' 9' $661.34 
RW-RackBack10x16 16' 10' $698.96 

Rack Cage is designed for teardrop-style pallet racks

Rack guards can be installed on any rack, but require different hardware. These are configured for teardrop style racks. If your rack is another type, contact us for assistance.

Protect Employees and Inventory

Woven wire panels are mounted directly to pallet rack as a backing system to put a steel barrier between inventory and the picking aisles below. Mounting bracket length may vary to accommodate pallet overhang so that the panel doesn't simply catch a spill - it prevents it. Once in place, the panels stop load spillage and create a "wall of protection" for employees working near the rack or walking through pallet rack aisle ways. Hinged or sliding gates may be added to totally enclose the rack, as well as its contents.

Specification:

  1. Beam width between rack uprights
  2. Upright width
  3. Overall number of bays
  4. Required offset dimensions from upright to panel (allows for pallet overhang)
  5. Mounting height above floor (if not flush to floor)
  6. Overall height of rack uprights
  7. Desired backing height

Pallet Rack Gates to Secure your Inventory

It's simple to add extra security to your pallet rack system with hinged and sliding gates. Control access and prevent inventory theft with our pallet rack enclosures. See rack security cages for preconfigured RackBack with swinging gates for more details.