8" V-Groove Iron Wheels

Designed for controlled applications with inverted angle track

  • V-Groove wheels are high strength cast iron castings or forged steel forgings

  • Machined with a 90 degree groove for operation on inverted angle iron track

  • They are used to control the flow of a load (into an oven, between machines, over long distances, or where "production line" sequences must be maintained.)

  • Up to 10,000 pounds capacity each wheel

  • Temperature range: -50º to 800º F



Model No. Face Width Hub Length Axle Dia. Cap. (lbs.) Bearing Price
VIR-0820-08 2" 2-7/16" 1/2" 1050 Straight $93.07 
VIT-0820-08 2" 2-7/16" 1/2" 1050 Tapered $226.05 
VIR-0820-10 2" 2-7/16" 5/8" 1050 Straight $96.64 
VIR-0820-12 2" 2-7/16" 3/4" 1050 Straight $89.48 
VIT-0820-12 2" 2-7/16" 3/4" 1050 Tapered $190.90 
VIR-0825-12 2-1/2" 3-1/2" 3/4" 3000 Straight $116.49 
VIT-0825-12 2-1/2" 3-1/2" 3/4" 3000 Tapered $144.58 
VIR-0825-16 2-1/2" 3-1/2" 1" 3000 Straight $112.66 
VIR-0825-16-SI 2-1/2" 3-1/2" 1" 3000 Straight $118.90 
VIT-0825-16 2-1/2" 3-1/2" 1" 3000 Tapered $162.15 
VIR-0825-20 2-1/2" 3-1/2" 1-1/4" 3000 Straight $114.34 
VIR-0830-12 3" 3-1/2" 3/4" 5000 Straight $124.38 
VIT-0830-12 3" 3-1/2" 3/4" 5000 Tapered $139.66 
VIR-0830-16 3" 3-1/2" 1" 5000 Straight $120.73 
VIT-0830-16 3" 3-1/2" 1" 5000 Tapered $157.23 
VIR-0830-20 3" 3-1/2" 1-1/4" 5000 Straight $122.43 


Straight Roller Bearings

Straight roller bearings consist of a cage-type roller assembly and a split outer race.  These bearings turn on hardened and ground spanner bushings which provide a long wearing precision inner race.  Press fit combination metal retainer/thrust washers hold the bearings in place.  Straight roller bearings have a high radial capacity, but minimal side thrusting load rating.

Tapered Bearings

Tapered roller bearings are true precision bearings designed for the heaviest loads, and/or high-speed operation.  In addition to great radial capacity, they have a side thrust load rating of 60% to 90% of radial capacity rating.  The assembly consists of an outer race or cup and a tapered cone roller assembly held in position with closures.  Spacers are provided to tighten the caster legs against the bearing assembly.  Two bearings are installed per wheel.