Home
Customer
Service
Cart
Quote Builder
LoginRivet Shelving Drawings
Mounting hardware and exploded drawings
- Single Rivet Standard Duty: Primarily used as an intermediate shelf support when maximum vertical space between levels is needed. Furnished as standard on High Density Shelving units.
- Single Rivet Heavy Duty: Manufactured to provide maximum capacity with very little loss of usable vertical space between shelves.
- Double Rivet Standard Duty: Used to establish unit stability and to provide shelf support on all four sides.
- Double Rivet Heavy Duty: Provides stability and increased load capacity in the longer lengths.
- Double Rivet Zee Step: Reduced profile increases vertical clearance by 1-1/4” between shelf levels when used in place of Double Rivet Angle Beams. Protects decking edges. When used as the bottom shelf on Single Rivet Units, clear space between the bottom and first shelf is increased by 1-1/4”.
- Double Rivet Channel Beam: Channel is designed to provide maximum left to right stability and higher capacity than standard or heavy duty beams. Cannot be used at floor level. The top flange has holes for fastening decking.
Single Rivet Shelving - Component Layout
Single Rivet high density shelving uses single rivet beams for intermediate levels and double rivet beams at the top and the bottom to add rigidity to the unit.
Double Rivet Shelving - Component Layout
Typical Double Rivet Units are designed for spans ranging from 48" to 96" wide. They are high capacity units designed with many options to enhance their storage capacity and flexibility.
