Penco Locker Handle Options

Vanguard Standard Locker Handle

Included on single tier, double tier, two person, and duplex Vanguard Standard lockers.

The handle is made of a chrome plated zinc alloy, and may be used with built in locks or padlocks.

Single Point Latch

Single point latching provides low maintenance with no moving parts. They are available as an option for Corridor, KD Athletic, All Welded, and HD Welded lockers. May not be used with box lockers.

Each door has a deep drawn stainless steel pocket handle with an integral door pull. The door can be locked with a built in lock or with a padlock using the padlock staple which protrudes through the handle.

All doors with single point latching are upgraded to 14 gauge, and include box formed stiffeners running vertically on both sides of the door. In addition, the doors will have a 16 ga continuous hinge running the full height of the door.

Recessed Single Point Latch handles will work with built-in locks ot padlocks.

These handles are not compatible with ADA requirements.

Stainless Steel Recessed Handle

This is the standard handle for Corridor, KD Athletic, All Welded, and HD Welded lockers. This handle can be specified for Vanguard Standard lockers as an option.

Included on single tier, double tier, two person, and duplex lockers. Can not be used on box lockers. May be used with built in locks or padlocks.

Box Locker Handle

This handle is included on 4-9 tier box lockers across the Vanguard, KD Athletic, All Welded, and HD Welded locker styles.

When used with padlocks, a combination door pull with friction catch and lock hole cover plate is used.

When used with built in locks, the door pull, friction catch, and lock cover plate is deleted.

Box Locker Spring Latch

The spring loaded latch is optional for KD Athletic, All Welded, and HD Welded box lockers.

It may be used with built-in locks or padlocks.                               

Cremone Handles

Cremone turn handles are a heavy duty multi-point latch system that engages the door on three sides. The top and bottom frames are engaged with 3/8" steel rods, and a 1/8" thick center latch which engages the side.

This handle is available as an option only for the HD Welded lockers. It may be used with built-in locks or padlocks.