Penco Locker Door Options

Automatic Multi-Point Latching

With multi-point latching, the door engages the frame in 2 locations on double and triple tier doors, and 3 places on single tier doors.

Multi-point latching also allows the door to be closed without unlocking. Standard on all doors except box lockers, and doors with Single Point Latching or cremone handles.

Single Point Latch

Single point latching provides low maintenance with no moving parts. They are available as an option for Corridor, KD Athletic, All Welded, and HD Welded lockers. May not be used with box lockers.

Each door has a deep drawn stainless steel pocket handle with an integral door pull. The door can be locked with a built in lock or with a padlock using the padlock staple which protrudes through the handle.

All doors with single point latching are upgraded to 14 gauge, and include box formed stiffeners running vertically on both sides of the door. In addition, the doors will have a 16 ga. continuous hinge running the full height of the door.

Recessed Single Point Latch handles will work with built-in locks ot padlocks.

These handles are not compatible with ADA requirements.

Sound Dampening Panel

You can add a  sound dampening panel to the inside of the locker doors to cut down on the noise from slamming the doors shut.

The panel is welded in place, and requires that louvers be omitted from the door.

The panel can be applied to any Vanguard, Guardian, KD Athletic, or All Welded lockers with doors between 20" and 72" high.