Coil Spooling Station

Combines two process stations into one

Submit a Conveyor Inquiry

This unit was designed to handle 300 lb. coils of copper air conditioner tubing. A gantry robot places these coils on the support arms which are attached to the Hytrol Model CRR conveyor.

An operator at the station places a spool side on a centering pin which is in the center of the conveyor. After cutting off the bands and trimming the ends of the tubing, the conveyor is raised until the spool side touches the bottom of the support plates. A cardboard spreader hub is inserted into the inside of the spool. The support plates are then retracted, the conveyor lowered, and the spool moves down the line to shipping.

This operation is done at one station where previously two stations were required.

For more information, submit a conveyor request or call customer service toll-free during Central time business hours.