Mezzanine / Raised Platform Safety Gates

Increase safety and prevent falls by gating access points

  • Protect workers from open mezzanine edges
  • Pivot gates help prevent falls by keeping workers away from open edge while loading/unloading
  • Pedestrian gates add protection at stair and ladder access points by closing off the open platform edge but gates easily swing inward for pedestrian access
  • Safely load/unload materials at the mezzanine level
  • Pivot gates satisfy ANSI MH28.3-2009 6.4.3 requirements for dual gate systems

category blue arrowPivot & Roll-up Safety Gates

Pivot & Roll-up Safety GatesPut safety first and prevent workers from stepping off a raised platform during loading and unloading of materials. Load and unload using a forklift from the lower level while closing off access at the platform level, then pivot the gate to access at the platform level.

category blue arrowPedestrian Swing Gates

Pedestrian Swing GatesHelp protect workers from dangerous falls by closing off pedestrian access points that lead to ladders, stairs or platforms without guard rail.

 

Pivot & Roll-up Safety Gates

Safely move pallets, skids, containers and other loads on and off your mezzanine with a mezzanine safety gate in place.  They work with almost any mezzanine, including new platforms or a mezzanine already installed in your facility.  They are easy to install and use, providing a system where it is nearly impossible for a worker to accidentally fall from the platform edge.

 

Pivot Safety Gate for mezzanines

Safety Gates for Load/Unload Points

  • Simply lift guard rail to enter loading platform. Place load on platform and lower guard rail after exiting platform
  • Opposite side is now open for fork lift to pick up load

 

safety gates protect workers atop mezzanines

Overhead Roller Safety Gates

  • Lower guard rail on platform side of gate to open edge access for loading/unloading
  • Raise guard rail to access materials while keeping workers away from the edge

 

 

Tri-Side Safety Gates

  • When edge gate is open, inside floor level gate closes to create a three-sided enclosure around the load zone and prevents workers from approaching the mezzanine edge
  • Once load has been placed or moved away, the inside gate can be lifted to open access to the load zone
  • As the inside gate opens, the edge gate lowers to close off the open edge and keep workers from stepping of the open edge

 

Pedestrian Swing Gates

  • Close off open edges at ladders and stairs to prevent accidental falls while working on the platform
  • Easily swings inward to allow workers to come up onto platform or safety descend down stairs or ladders