Sleeve Insert Free Standing Jib Cranes

360 degree rotation maximizes floor space usage below crane

Install using a second-pour reinforced foundation in which the sleeve is embedded
Mast is inserted into sleeve, leveled, and welded in place; can relocate without damaging mast
Top assembly has Timken tapered roller bearing
Load is transferred from the top of the box through the lower trunnion roller assembly channel mount
Head assembly is constructed for minimum deflection and maximum rigidity

About Sleeve Insert Jib Cranes

Sleeve Insert Mounting: a second reinforced foundation is poured into the existing building slab. The foundation pour consists of an initial pour in which anchor bolts are embedded into the concrete through the sleeve insert base plate.

Once the sleeve insert is in place, the rest of the foundation is poured around the sleeve insert, providing the appropriate weight and size to anchor and counterbalance the crane when under maximum load.

Typical foundation sizes range from 3 ft. deep by 4 ft. square to 5 ft. deep by 11 ft square.