Wire Mesh Security Cages, Partitions, Rooms
Prevent pilferage, protect inventory, and segment areas with a wire mesh cage
 |
10 ga. wire woven into a 2"x1" mesh, and welded to an angle iron frame. These panels bolt to 2"x2" square posts. The components are easily assembled to construct tool cribs, secure storage, or to close off part of a room. Available with hinged and sliding doors in a large number of sizes and configurations. |
 |
Restrict access to your warehouse by securing dock-side personnel doors. Driver security cages provide a secure waiting area for deliverymen, truck drivers, service crews, and other visitors. Partitions are built with high-strength welded wire mesh for complete security. |
 |
DEA Storage Cages can help solve many of the special problems for drug manufacturers, distributors, and wholesalers face when it comes to regulations or in-plant security of Scheduled III, IV, and V controlled substances: as outlined in Title 21 CFR Sections1301:72-1301.76 physical security controls. Enclosures are secure: hardware is inaccessible from outside the partition. 3/8" assembly hardware is the heaviest in the industry. |
 |
From local to state and federal law enforcements agencies as well as the military, these holding cells offer a great solution to a temporary or even permanent minimum security holding facility. They are even perfect for any large event where detention might be needed. |
 |
8 ga. vertical and 10 ga. horizontal wires are placed in a 2" x 2" center to center square mesh. Where the wires intersect, they are welded together. The ends of the wire are securely welded on all four sides to a 1-1/4" x 1-1/4" x 1/8" 13 ga. roll formed angle. The panels attach to 2" x 2" posts with clips and self tapping screws. This configuration makes it easy to drop in panels and are easily assembled into secure storage areas, or to divide a room. These partitions are available with hinged or sliding doors. |
 |
By simply piecing together the posts, panels, and doors of your desired height and width you can easily construct a secure door way, partition wall, or cage. Panels come in either 8', 10', or 12' high with widths from 12" all the way up to 120". The ends of the wire are welded on all four sides to a 1-1/4" x 1-1/4" x 13 ga. roll formed angle. Hinged doors come in 3' and 4' wide sizes with all three heights available and 2'w posts and standard door locks are also available. |
Other Security Cage Types
- Chrome Wire & Mobile Security Cages: These are smaller in dimension (typically they aren't walk-in)
- Wire Security Cages for Pallet Racks: Secure your pallet rack bays.
- Mesh cage lockers: Secure storage for personal items and equipment. Some configurations may be used for tenant storage in apartment and condo buildings. Others will enclose pallet racks, or hold LP tanks.
-
Other info:
- Installation Manual (PDF 4.4MB)
- Wall/Floor Requirements
Installation and Security
Wire partitions allow you to choose the size and gate type that best fit your application. Panels bolt directly to support posts, which are set on maximum 10'-2" centers. Installation is faster than competitive wire enclosures. The design utilizes fewer total parts, making installation quicker and less complex. They're based on the concept of 4' or 5' high panels stacked one on top of the other between tubular posts to reach desired partition height.
The design utilizes fewer total parts, making installation quicker and less complex. They're based on the concept of 4' or 5' high panels stacked one on top of the other between tubular posts to reach desired partition height. Enclosures are secure, as hardware is inaccessible from the outside of the partition. 3/8" assembly hardware is the heaviest in the industry. Each model listed includes posts, panels, gate with cylinder lock, assembly hardware, and floor anchors. Straight lines and clean exterior makes a handsome finishing touch to your storage area.
Enclosures are secure, as hardware is inaccessible
from the outside of the partition. 3/8" assembly hardware is the heaviest in
the industry. Each model listed includes posts, panels, gate with cylinder
lock, assembly hardware, and floor anchors. Straight lines and clean
exterior makes a handsome finishing touch to your storage area.
Why wire partitions are better than chain link fences and fencing
- Over their lifetime, wire mesh partitions are less expensive than chain link fencing. They cost a bit more upfront (not always, since chain link is harder to install) but save you money for years to come.
- Woven wire partitions can be removed, relocated, and put back together. You can even change their configurations when your needs change.
- The modular design is what allows this flexibility; use it, re-use it, move it around - with ease. But fencing? Once it's up, it's up for good and usually has to be trashed when you need a change.
- Wire partitions are much more secure. A guy with bolt cutters can get through a chain link fence. It takes more than that to get into a woven wire partition. They can't be easily climbed like a fence, either. There are no easy foot or handholds in the woven wire panels.
- If a partition is damaged, you just remove the old panel and order a new one. If a fence is damaged, you have to pretty much redo everything.
Wire Mesh Partition Applications
Utilize wire mesh partitions and partitions for security areas, to
prevent pilferage, to enclose work areas, and to create customized,
accessible security areas in warehouses, manufacturing facilities, and
distribution centers. Great for stock rooms and other secure locations.
Panels install horizontally, between tubular posts. The panels are four
or five feet tall, have lengths of one to ten feet (other sizes are
available). Two or more panels are stacked to reach full partition height.
Posts are 8'5" and 10'5" lengths, and are available for any height up to 40
feet.
Wire Security Cage Construction
Wire mesh wall and ceiling panels are interchangeable...totally modular.
This feature simplifies relocation and layout changes.
Partitions are built with durable 3/8" hardware. Once installed, the
hardware is not accessible from the exterior. Furthermore, the panel's all
welded construction, combined with the posts welded base plates, provide
unequaled strength and security.
Wire Partition Components
Panels, posts, windows and gates are high-quality woven or welded wire, dependent on application. See individual cages for exact specifications.
Get started...
Cisco-Eagle helps you get exactly the right Wire Partitions and Wire mesh security cages to create secure space for storage and work in process. For more information, call Customer Service or submit an inquiry: