Move the cursor over the thumbnails to see a larger image below.
RapidWire HD™ welded wire panel is 7' w x 5' h. When combined with posts, it creates a 6’2"
barrier with approximately 1’ under-clearance. Panel is constructed of 10-gauge
steel wire welded into 1-1/4" by 3" rectangular welded wire mesh and welded into a
1-1/4" x 1-1/4" x 13 gauge steel angle frame. Frame has slotted holes for mounting to adjacent posts
erected, barriers restrict access to a work cell, machining area, conveyor, or
other automated equipment and prevents employees, visitors, or contractors from
wandering into an area where injuries can occur or equipment can be damaged.
Physical Barriers will not interrupt robotic operations through mischievous or
inadvertent contact, as may happen with light curtains or switchmats. The
barrier doubles as a potential safety net by helping to contain objects thrown
or ejected by a malfunctioning robot. Combine panels, posts, and gates to create
a wire barrier that keeps areas segmented and still allows visibility and access
to those who need it. It’s easy to install with 1/2" wedge anchors. All parts
are finished in Gray Enamel. Hardware: All erection hardware is supplied with
your order. Panel mounting hardware is standard thread 3/8” plated fasteners.
Floor anchors are 1/2" or 3/8" wedge type.
Configure the way you want it...
Can be configured into 1, 2, 3, and 4-sided combinations, to fit virtually
any space. Configuration Assistance is available by contacting Cisco-Eagle
RapidWire HD TM MATERIAL SPECIFICATIONS
PANELS Panels are constructed of 1-1/4" x 3" welded mesh, 10 gauge
vertical wires securely welded to 8 gauge long wires. Mesh is securely welded
into a 1-1/4" x 1-1/4" x 13 gauge roll formed angle frame. Panel frames have
7/16" x 5/8" slotted holes for mounting to posts.
POSTS Posts are made of 2" x 2" x 14 gauge steel tubing. Base plates of 2"
x 7" x 1/4" steel flat with two 7/16" round holes for floor anchoring, are
welded to each. Top of post is finished with decorative plastic cap. Posts have
factory drilled 1/2" holes for mounting panels.
DOORS Doors are constructed of 1-1/4" x 3" welded wire mesh, securely
welded into a 1-1/4" x 1-1/4" x 13 gauge steel angle frame. Doors have 10" x 16
gauge steel plate welded across center. Optional door lock designed to fit into
formed center plate. Two horizontal, (and for hinge doors, two diagonal)
stiffeners made of 1/4" x 3/4" flat steel are welded to door frame behind the
HARDWARE All erection hardware is supplied with order. Panels attach to
posts with standard 3/8" bolts. Posts anchor to floor with 3/8" wedge type
FINISH Non-plated parts receive one coat of gray acrylic enamel. Other
colors and powder coat are available.
We're here to help you
Cisco-Eagle provides speedy service and expert assistance on all material handling products. If you need help of any kind, please contact us.
Call Toll Free: 888-877-3861, 7AM-5PM Central Time
Customer Center: Inquiry forms for fast response
Downloads & Tools