Vertical Lift Configuration Inquiry
  • If you don't know the answer to a question, skip it.
  • Mandatory questions marked with *
*Name:
Title:
*Company:
Address:
City:
State:      Zip: 
*e-Mail:
*Telephone:
Contact Preference: E-Mail Telephone
Lift Type: SERIES D SERIES 21 SERIES M SERIES F

If you don't know which one to choose, leave this selection blank, and we will help you specify the correct lift
Live Load Capacity (Lbs.): Vertical Clearance above top level (feet):
Total Vertical Travel Number Of Stops

Effective Carriage Dimensions

CARRIAGE - The usable part of the lift where the product is located
Width: Length: Height:
LOADING PATTERN: C Z 90
Installation: Will You be using a pit? Ramp Required?  
  Yes No Yes No  
Power Requirements: Voltage (VAC) Phase HZ
  1 3 60 50
Where will this lift be installed?
Note: Swing gates are the most commonly specified. You may have a combination of gate types on a single lift; contact us for help with combination or multi-level gates.
 
Number of gates per level:
Level 1: Level 2: Level 3: Level 4:
Floor Level Enclosures: Standard Full Height Roll-Off (Mezz) NBP
Load Factors
What is being loaded?
How is it being loaded at each level?
Number of cycles per day?
Will a knockdown carriage be used? Yes No
Loading Ends:  Snapchain Dropbar
Side Guards:  Handrails Expanded Metal Solid Sheet
Side Guard Height:  48" 84"
NEMA Rating:  12 (Std) 4 (Wet) 4X (Corrosive) 7 or 9 (Explosive)
Application Notes

Want to attach a drawing, file, or bid spec?

Enter File Location:

FILE TYPES ACCEPTED: .jpg, .gif, .doc, .pdf, .xls, .txt, .zip, .dwg. Large files will cause your form to submit slowly, so be patient if you are sending files larger than 1MB. For multiple file uploads, utilize ZIP to compress into a single file, or contact us.

STRUCTURE

Frame is designed to be self-supporting and constructed of structural tube and steel. Carriage is typically supplied with powered roller conveyor deck. Carriage is cantilever style and may be loaded from any one of three operating sides depending on application.

OPERATION

Carriage is lifted and lowered by timing belt attached to an electric motor-reducer assembly mounted on the frame. Power unit employs a 1/2 HP TEFC brake motor mounted to the top of lift frame.

ELECTRICAL

Standard power requirements are 230V/460V, 3-phase. Single phase is available upon request. Control voltage is 110V. Control panel and push button station are NEMA 12. Control panel is designed to be mounted to the back of the frame, and all control devices are pre-wired at the factory. A variety of control options are available from basic interface to PLC automated controls.

SAFETY FEATURES

Upward and downward travel of the carriage is controlled by a limit switch. When the switch is tripped, the motor shuts off and the brake is engaged. Overload and carriage overtravel protection is provided.

CARRIAGE & SAFETY ENCLOSURES

Standard units include full-height enclosures on all sides made of 1/2" expanded metal. Optional expanded metal and sheet metal side guards are available for carriage.

  • Lifts live loads up to 100 lbs.
  • Carriage sizes up to 3ft. x 3ft.
  • Vertical rise up to 50'
  • Travel speeds from 60 to 400 feet per minute
  • Provides throughput of 4.5 to 6.5 loads per minute
  • Allows loading and unloading from 3 sides
  • Counterweighted design minimizes hp requirements saving energy costs

VRC Guideline Book (976 KB PDF, Opens new window)

VRC Application Suggestions (Web Page, opens new window)

Dimensions & Data (202 KB PDF, Opens new window)

spec help logo

We're here to help you

Cisco-Eagle provides speedy service and expert assistance on all material handling products. If you need help of any kind, please contact us.
  • Call Toll Free: 888-877-3861, 7AM-5PM Central Time
  • Customer Center: Inquiry forms for fast response

Product Tools

About Cisco-Eagle

Downloads & Tools

DualBelt Vertical Lift, Series DB - 3' x 3', Vertical Travel up to 50'

Vertical Lifts transport materials from one level to another - use with mezzanines, multi-level operations, and more

Manufacturer: Pflow

Features Exclusive DualBelt Lifting Mechanism For Smooth, Quiet Operation. Ideal for high-speed applications that require light-duty lifting of boxes, cartons, packages, totes, containers or cases. Provides quiet, ultra smooth operation, requires minimal maintenance - lifting belt never needs lubricating. Perfect for use in an automated system, DB Lifts save space and handles loads that are often transported on an inclined conveyor. Versatile, completely self-contained, self-standing and economical. Moves loads to mezzanines, between floors or between conveyor levels.

Price range...

SKU:Pflow-DB

This product is priced per application. The price range above will provide you an approximate price. For exact pricing, please contact us.