DEA Storage Cages can help solve many of the special problems for drug manufacturers, distributors, and wholesalers face when it comes to regulations or in-plant security of Scheduled III, IV, and V controlled substances.

• Doors are self-closing and self-locking; all hardware has been brazed, pinned or tack welded in place; Universal construction so that door installation can be left or right, inside or outside; Sliding door must be installed on 12" wide minimum cage wall for full 6 ft. opening capability
• Partitions are assembled with durable 3/8" hardware
• Hardware is not accessible from the exterior
• Posts have welded on base plates for lagging to the floor
• Double-tough construction provides unequaled strength and security
• Installation is fast because the design uses fewer total parts
• Panels install horizontally between 14-gauge tubular posts. They are steel wire woven into 2" x 1" rectangular mesh and securely welded to a 1¼" x 1¼" x 3/16" steel angle frame
• Walls have minimum 1-1/2" horizontal reinforcement at least every 60 inches and the panels are mounted flush to the floor
• Listed dimensions reflect exterior size; enclosed dimensions are slightly smaller
• Standard footplates are 2" x 7". They extend outside the post by 2½” per corner post position depending on footplate orientation. They will slightly increase overall dimensions
• If you are in a seismic zone, or your floor is not smooth or even, a larger footplate may be required
• If overall dimensions are extremely critical to your project, contact us for assistance. We can calculate the precise size of your enclosure in advance
• Finish: Gray acrylic enamel

4-sided structure: