Move the cursor over the thumbnails to see a larger image below.

Yellow 18" reflector with 1000 candle power reflectivity

Yellow 18" reflector with 1000 candle power reflectivity as seen between two trucks at dock

Reflectors seen from outside dock approach during daylight hours

Reflectivity as seen from dock approach ramp during daylight hours

Reflectors seen from street at end of dock approach during daylight hours

Reflectors seen from a distance outside dock area during daylight hours

Reflectivity as seen from dock approach at night

Red and white reflector during daylight hours

Yellow 18" reflector with 1000 candle power reflectivity

When ordering, consider alternating colors if purchasing for several loading docks. Doing this will further aid drivers when they can see that the dock they are pulling into has yellow reflectors, whereas the docks on each side are marked with red or red/white reflectors.

Mounting instructions

Utilize a wall anchoring tool to "shoot" anchors into dock sidewall using holes in corners of reflector as anchor points.

Lacking a concrete anchor tool, use 1" plastic screw anchors with screws, drill with 1/4" drill bit, scribe, ruler, level, and screw driver.

The reflectors should be vertically mounted approximately 2" below the rubber bumpers, but should be adjusted to avoid contact with the drive.

Drill one of the top holes first and mount in place. Leave this screw loose so as to allow vertical and plumb adjustments prior to tightening. Drill the remaining holes, then tighten all screws.

spec help logo

We're here to help you

Cisco-Eagle provides speedy service and expert assistance on all material handling products. If you need help of any kind, please contact us.

Call Toll Free: 888-877-3861, 7AM-5PM Central Time
Customer Center: Inquiry forms for fast response

Product Tools

View Cart
View Quote Builder - request a quote for any catalog product

About Cisco-Eagle

Downloads & Tools

Dock Reflector, Set of 4 - Red, 4" x 18"

Reflectivity so strong drivers easily line up with dock

SKU:GL2-018R

Manufacturer: Erich Industries

With a reflective brilliance of up to 600 candle power, each dock reflector in this set of 4 provides plenty of illumination in dark loading dock approaches and aids drivers in positioning the trailer accurately when mounted correctly. The reflective material that makes these so powerful is an advanced retro-reflective microprismatic material with superior weatherability in cold, heat and wet conditions. Exceeding clause 7.5 of the industry standard EN471, this product is reflective at even wide angles and at distances typical for loading dock approaches. RF weld sealed to reinforced vinyl backing, each reflector has a brass grommet at each corner for mounting with a wall anchor tool or concrete screw anchors. Unit requires no light bulbs or electricity to operate. Color: Red

Your price...

$111.83