Closed Steel Shelving, 36 x 18 x 87, 6-Shelf Starter, 850 lbs. cap.

Select	Qty	Options	Description	Price
			Closed Steel Shelving, 36 x 18 x 87, 6-Shelf Adder, 850 lbs. cap.	$230.70
			36 x 18 Steel Shelf, 20-Gauge, 850 lbs. cap.	$19.07

Move the cursor over the thumbnails to see a larger image below.

Closed shelving is a good bin system for order picking operations.

Use Closed Steel Shelving for protective storage and a more orderly, cleaner look

Closed-type shelving units utilize panels to enclose the backs and sides of the shelving unit, giving greater stability. Closed units offer greater protection of stored items than do open units. Closed shelving confer a cleaner, finished look and can be combined with a variety of options, including doors to create a lockable cabinet. Closed shelving prevents dust accumulation, protects the load, and hides stored contents for a more orderly and attractive appearance.

Starter Unit Components

Quantity	Components
4	87" tall Angle Posts
6,7,or 8	Shelves in the specified width and depth.
1	Back panel equal to shelving unit width and height
2	Side panels equal to shelving unit depth and height
4 per shelf	Shelf Clips
15	1/4-20x1/2 Nuts and bolts.
1	Assembly Instructions

Four Clipper Compression Clips are included with each shelf. Shelf is held tight against post
Shelves adjust on 1" increments
Shelving ships in standard 028 gray. Other colors are available. Contact us for details
A variety of accessories are available for steel shelving, ranging from dividers to bins to modular drawer inserts. Steel shelving is the most customizable shelving type
Do you need open or closed shelving? See Open vs. Closed shelving for comparisons and applications
Metal shelving glossary for more detailed information on shelving components

All shelving shall comply with SMA and ANSI MH 28.1-1982 and in addition shall have the following characteristics:

OFFSET ANGLE POSTS: Offset angle posts are used on all sides of these shelving units. Offset angle post shall be roll formed and have overall dimensions of 1-1/8" wide x 2-1/2" deep. The rear flange shall be punched to accept sway braces or backs, the side flange shall be punched to accept side sway braces or side panels. Posts are punched on 1" vertical centers for maximum shelf adjustability. The flange is punched on 3" centers to accept side sway bracing. Offset angle post shall be roll formed and have overall dimensions of 1-1/8" wide x 2-1/2" deep.

SIDE PANELS: Shall be 24 gauge steel. Each side shall be punched with holes for bolting to posts.

BACK PANELS: Shall be 24 gauge steel with holes on each side for bolting to angle posts and in the middle for using a back panel clip.

CLIPPER SHELF CLIP: One piece 14 gauge rugged compression type to insert into either box or offset angle posts to form a positive four point connection. Clips shall have two claw-like hooks to seat firmly into post slots and two tabs at bottom to seat into post holes for a tight friction connection. All clips for all posts and shelves to be the same. Design shall offer a pre-clipping feature to simplify erection. Finish: zinc plated. All shelves are to have four independently adjustable clips.

SHELVES: Clipper Shelving features Hi-Performance Box Beam Shelves. These are produced on a state-of-the-art production line that begins with a flat steel blank and ends with a completed shelf. Extra shelves can be added to Metal Clip Shelving units and include 4 shelf clips per shelf. For additional strength, flanges of the box beams are welded to the underside of the shelf on 3" centers, shelf corners are lapped and welded and sides are double flanged. Shelf is punched on the face and surface to accept accessories. Shelves are available in a wide variety of sizes. These shelves are heavy-duty 20 gauge.

FINISH: Materials shall be cleaned and phosphatized in a multi-stage process, dried in a 400 degrees oven and electrostatically spray painted with a high grade enamel and baked on at 360 degrees.