SPECIFICATIONS: This wire shelving unit measures 72"w x 24"d x 86"h and weighs 141 pounds. Each one of its 5 shelves has a capacity of 600 pounds. The total unit has a capacity of 2400 pounds. This is an adder unit. It connects to starter units to configure economical rows of shelving.

Installation is a "Snap" and requires no tools

Numerically calibrated grooved posts, tapered plastic split sleeves and shelf collars combine to make shelving assembly a simple two-step exercise: (1) snap the split sleeves onto a post over the number of your choice; and (2) slide a shelf collar over the split sleeves. A positive lock between shelf and post is created without the use of any tools.

Bright, clean Eaglebrite Zinc Finish has a 3-year Warranty

Eaglebrite Zinc is the standard finish. It utilizes a four layer coating system that gives you an attractive, tough, and durable gleaming finish that resists rusting, scratching, and abuse. NSF listed for all environments. Other finishes are available by request.

Wire shelf: constructed of carbon steel or type 304 stainless steel wire, consists of a top mat assembly using 10 gauge (.135" diameter) mat wires spaced on 7" centers and welded to full length 6 gauge (.187" diameter) inside support wires and serpentine trusses. Quantities of each are based on shelf size. Mat wires are welded to a four-wire truss assembly at front and rear of shelf. Front and rear four-wire truss assembly is constructed of a 2 gauge (.250" diameter) bottom wire, a 6 gauge (.187" diameter) serpentine truss wire which creates a bridge-like reinforcement providing increased strength, and two 6 gauge (.187" diameter) top wires — one directly below mat wires and one directly above — which provide a pincer hold on mat wires.

Top mat assembly is supported on each end by a three-wire truss assembly consisting of a 2 gauge (.250" diameter) bottom wire, a 6 gauge (.187" diameter) serpentine truss, and one 6 gauge (.187" diameter) top wire. Entire wire mat and truss assembly is notched at outside corners to accept a 12 gauge conical shaped collar, 1-5/8" in height which is welded in place. Conical-shaped collar is designed to accept a tapered ABS plastic split sleeve, or aluminum split sleeve, which clips over 16 gauge, 1"-diameter steel grooved post.

Wire shelf and post are either plated or epoxy coated with applicable finish as specified and constructed in accordance with the National Sanitation Foundation (NSF) standards and bear its seal of approval.

Wire shelf as specified will be QuadTruss® design from Cisco-Eagle, Inc.

Installation instructions (PDF, opens a new window)
Specifications (PDF, opens a new window)
The QuadTruss System: Why it's stronger (PDF, opens a new window)
Print Catalog: Shelving Section (1141.87KB PDF, opens new window)

We're here to help you

Cisco-Eagle provides speedy service and expert assistance on all material handling products. If you need help of any kind, please contact us.

• Call Toll Free: 888-877-3861, 7AM-5PM Central Time
• Customer Center: Inquiry forms for fast response

Product Tools

• View Cart
• View Quote Builder - request a quote for any catalog product

About Cisco-Eagle

• Privacy Policy
• Freight Policies
• Who We Are and Company History
• Frequently Asked Questions

Downloads & Tools

• Product Guides
• Literature Downloads
• Monthly Newsletter Subscriptions