Inquire about your mezzanine requirement

Submit for a quick response

  • If you don't know the answer to a question, skip it.
  • Most fields are not required - submit what you know.
  • You may also call Customer Service at 888-877-3861
What kind of mezzanine are you looking for?

Select a type of mezzanine:


Structural mezzanines use cold formed "C" section framing to support the mezzanine deck with spans up to 20 feet. Bar joists are used for spans greater than 20 feet.
Shelving is used to support the deck. The deck may run across the top of the shelving units below, or it may be supported in the aisles between tall shelving units as a catwalk.
Pallet rack is used to support the deck. The deck may run across the top of the rack units below, or it may be supported in the aisles between tall racks units as a catwalk.



Maximum Uniform Live Load (Lbs/Sq. Ft.): 125 PSF is typical

Mezzanine application:








What kind of decking do you need?

Select your preferred decking surface:









What are the dimensions for your mezzanine?

 See the attached drawing for dimensions.

  x

This is the distance from the floor to the lowest obstruction in the ceiling such as lights, fire sprinklers, or HVAC.


Length: x Width:

Do you require handrail? Yes No
Do you need gates? Yes No
Will you need stairs? Yes No
What building code or standard applies to your location?

Stairs and rails will be designed in accordance with the code or standard you select. We can assist you with code issues.






Is ADA compliance required in addition to the code or standard? Yes No

Do you have any special instructions?
Do you need to attach a drawing, photo, or specifications? Yes No
How soon will you need this?

If you have a long lead time or need it in a hurry, please let us know.

Where will this product be shipping to?

This information is required to provide you a shipping cost.

City:     State:     Zip:
How can we reply?

Move the cursor over the thumbnails to see a larger image below.

Mezzanine used to support conveyor mezzanine with incline conveyor mezzanine with in plant office multi-level pick module mezzanine mezzanine roof deck mezzanine with security cage structural storage mezzanine mezzanine conveyor
Beam and Beam mezzanine framing system
Mezzanine used to support conveyor
This application displays the flexibility of multi-level structural mezzanines to support conveyor systems in picking or progressive assembly applications.

More photos & details: Larger Image | Conveyor Details & Photos  |Shelving Layout

The mezzanine is configured with an incline, reversible belt conveyor to help you transport parts and bins from level to level with ease. It could be fitted differently--imagine carton flow on the floor, or an in-plant office on the top, some conveyor, or even using a shelf supported, rather than structural mezzanine. Since the sky's the limit, it depends on your needs. You can put nearly anything on a mezzanine, and you can deliver product to it a number of ways.

Mezzanine

Mezzanine is 32'-2" x 31'-5-1/2" (1,011 sq. ft.) with 9' clearance below the structure. Steps are 36" wide, 11" deep, and have a 7" rise. Stairway landing is 42" x 42" and features a diamond-plate deck. Guardrail is 2-1/2" by 2-1/2" square tubing uprights and 1-1/2" diameter horizontal tubing. This provides a solid platform for you to create customized, high-density, high-speed product storage.

Shelving

High-density, heavy-duty single rivet style shelving adds big storage in a small footprint. Shelves have 36 cubic feet of storage space each, including top-shelf load. In all, 198 shelving units provide 7,128 cubic feet of storage space--3,960 on the floor level and 3,168 on the mezzanine level. If equipped with 6" x 18" shelf bins (not included), you could have 10,000 pick faces.

Incline product conveyor

Reversible center-drive SBI floor-to-floor incline conveyor efficiently exchanges cartons between levels. It's 23'10" long, 18" belt width (overall width of 24".) It's equipped with an adjustable double nose-over at the discharge end for smooth transfer from incline to horizontal plane (in this case, it connects to a gravity infeed conveyor for smooth product handling). Conveyor includes two reversible control stations (top & floor) for “plug & play" convenience. Infeed is 30" above ground floor. Discharge is 30" above mezzanine floor. Inclines are easily adjusted up to 30 degrees. Adjustable universal channel guard rails are installed on both sides for product protection. 1HP/115volts/1ph brake motor. Reversing Magnetic starter with 2 up / down/ stop push button stations (one at each end). Conveyor has 65 FPM (feet per minute) constant speed. Important note:  With a 1 HP motor and the length of this unit, the maximum Total live conveyor load is 75 pounds, with a maximum of 100 pounds per linear foot.

How to order

Contact us and we'll get started. You can specify this mezzanine, but many variations of size, number of pick faces, and other options are yours for the asking. We'll design a modular parts storage department that fits your needs like a glove. If you require high-speed order fulfillment and inventory management, ask about our carousel, pick-to-light, and software driven solutions. Other methods are available for elevating product from ground to mezzanine, including vertical lifts, VRC's (vertical reciprocating conveyors), other conveyor types and automation. Contact us for assistance.

  • By purchasing this product online you are essentially requesting a quote at which time a qualified sales technician will contact you to discuss factors that may affect pricing.
  • Your order will only be processed after all application requirements have been met and drawings have been approved.

Verify that your floor can support the total weight of the mezzanine and its load. You will receive appropriate point loading diagrams that reflect these loads when approval drawings are signed and returned. We cannot assume responsibility for building integrity. Any building modifications necessary must be made by you or your contractors.

* Shipping time begins after mezzanine drawings approval

spec help logo

We're here to help you

Cisco-Eagle provides speedy service and expert assistance on all material handling products. If you need help of any kind, please contact us.
  • Call Toll Free: 888-877-3861, 7AM-5PM Central Time
  • Customer Center: Inquiry forms for fast response

Product Tools

About Cisco-Eagle

Downloads & Tools

High Density Parts Handling Mezzanine, 31’ x 32’, 1,000 square feet with shelving and incline conveyor

Add 1,011 square feet, 7,120 cubic feet of shelving storage, and 10,000 pick faces in a 32' x 31' footprint

SKU:Parts-Mezzanine

Manufacturer: Wildeck

This is an just one example of what can be done within limited space to increase storage density and order picking efficiency. This design creates 1,000 additional square feet and 10,000 pick faces. That's a lot, and could be even more. This typical layout should help you consider ways to design a high-density storage system, to help you improve storage density, ergonomics, pick speed and inventory control.

Your price...

$64,740.04 

Quantity:    

Call for GSA Pricing

  Country:  Zip: 
Weight:33090.0 lbs. Lead Time:  4-6 weeks* + transit time FOB:  Waukesha, WI  53186 Freight Class:  Flatbed