Move the cursor over the thumbnails to see a larger image below.
172
Loading...
Guards people from moving machinery
Guards people from moving machinery
Guards people from moving machinery
Gate is 3'4"w x 5'h. Height of gate is sized to match the height of the barrier. It’s framed in 1¼” x 1¼” x 3/16” steel angle. Wire mesh is 10-gauge steel wire woven into 2” x 1” rectangular mesh. Gates match the overall height and configuration of the barrier. Two gate posts, mounting hardware, and padlock lugs are included with each gate.
Once erected, barriers restrict access to
a work cell, machining area, conveyor, or other automated equipment and prevents employees,
visitors, or contractors from wandering into an area where injuries can occur or
equipment can be damaged. Physical Barriers will not interrupt robotic operations through mischievous or inadvertent contact, as may happen with light curtains or switchmats. The barrier doubles as a potential safety net by helping to contain objects thrown or ejected by a malfunctioning robot. Combine panels, posts, and gates to create a wire barrier that keeps areas segmented and still allows visibility and access to those who need it. It’s easy to install with 1/2" wedge anchors. All parts are finished in Gray Enamel. Hardware: All erection hardware is supplied with your order. Panel mounting hardware is standard thread 3/8” plated fasteners. Floor anchors are
1/2" or 3/8" wedge type.
Configure the way you want it...
Can be configured into 1, 2, 3, and 4-sided combinations, to fit virtually any
space.
Configuration Assistance is available by contacting Cisco-Eagle customer service.
PANELS - Shall be 10gauge steel wire crimped and woven in to 2" x 1" opening
rectangular mesh, securely welded into a frame of 1-1/4" x 1-1/4" x 1/8" steel
angle factory punched with 7/8" x 7/16" slotted holes to accept 3/8" mounting
hardware. Panels four to six feet wide shall have one 1/4" x 3/4" flat
stiffener, wider panels receive two 1/4" x 3/4" stiffeners. All panels shall be
fastened to posts with 3/8" x 3" plated bolts and nuts.
DOORS - Hinged shall be constructed of the same materials as the panels with
two 1/4" x 3/4" horizontal stiffeners across the width, and two diagonal 1/4" x
3/4" stiffeners from center to the corner. Hinged doors shall be equipped with
padlock lugs (cylinder lock optional), three 4" x 4" spun pin hinges, and pick
plate/slam bar assembly.
DOORS - Sliding shall be constructed of the same materials as the panels with
two 1/4" x 3/4" horizontal stiffeners across the width, and two vertical 1/4" x
3/4" stiffeners from center to top or bottom. Sliding doors shall be equipped
with two 4 wheel trolley trucks, 1-7/8" x 2-3/8" door track, pad lock lugs
(cylinder lock optional), and door keeper assembly.
POSTS - Shall be made of 2" x 2" x 14 gauge steel tubing. Base plates of 2" x
7" x 1/4" steel flat with two 7/16" round holes for anchoring, shall be welded
to each tube. Posts are factory drilled with 1/2" holes to accept hardware for
mounting panels.
HARDWARE - Shall be 3/8" standard thread grade two plated nuts and bolts.
Floor anchors are 3/8" wedge type-provided.
FINISH - Non-plated parts receive one coat of gray acrylic enamel. Touch up
paint included with each shipment.
We're here to help you
Cisco-Eagle provides speedy service and expert assistance on all material handling products. If you need help of any kind, please contact us.
Call Toll Free: 888-877-3861, 7AM-5PM Central Time
Customer Center: Inquiry forms for fast response
Product Tools
About Cisco-Eagle
Downloads & Tools
Home
Customer
Service
Cart
Quote Builder
Login
