Your shopping cart is currently empty.
Wire Mesh Rack Backing, 9' Wide x 10' High
Don't just catch the spill—prevent it with sturdy welded wire mesh rack guards
SKU: RW-RackBack9x10
Manufacturer: WireCrafters
This rack backing set is an all inclusive model. It fits a rack bay that is 9' (108 inches) wide, and 10' (120 inches) tall. The panel dimensions will be exactly as high as the rack upright, but minus approximately 6 inches width to fit inside the posts. Don't just catch the spill—prevent it. Rack Back panels bolt directly to your pallet rack uprights and create a sturdy barrier between inventory and traffic aisles below, making your operation safer and protecting your people, racks, and inventory. Rugged, all-welded angle-frame construction prevents dangerous spills. It protects employees from falling items and contains inventory in high rack bays. Durable all welded, angle frame panels will provide solid steel protection and a long service life. Optional posts can be ordered to mount backing to instead of bolting to rack uprights.
- Width: 9'
- Height: 10'
- Color: Gray
- Width: 9'
- Height: 10'
- Construction: 10 gauge welded steel wire
- Wire Mesh: 2" x 2" center to center
- Frame: 1-1/4" x 1-1/4", 13 gauge angle steel
- Mounting: Frame factory punched with slotted holes on 6" centers to accept hardware
- Hardware: 3/8" standard thread grade two plated nuts and bolts - included
- Stiffeners: (2) 1/4" x 3/4" flat steel vertical stiffeners
- Finish: Powder Coat
- Weight: 353.0 lbs. ea.
Click on the thumbnails to see a larger image below.
 |  |  |  |  |  |
Panels can be set to extend above the top rack beam.
Rack Cage is designed for teardrop-style pallet racks
Rack guards can be installed on any rack,
but require different hardware. These are configured for teardrop style
racks. If your rack is another type, contact us for assistance.
Especially in areas where case picking, pallet flow, and flow racks are used for the bottom row with bulk storage above, Rack Back panels protect employees from falling items by making sure nothing can come loose when pushed by a lift truck or if the pallet breaks. Wire barriers can be ordered flush or offset to allow pallet overhang; just specify when you order flush or overhang, and the amount of overhang needed. Attractive and easy to install: These wire rack backing panels install easily and quickly, with several mounting options to fit your specific needs. Clean, straight-line design makes for a very attractive warehouse area. They’re finished in gray, but you can specify other colors (costs may vary). Built tough: Constructed from 2" x
2", 10-gauge welded wire mesh and securely welded into a frame of 1-1/4" x 1-1/4" x 13 gauge steel angle.
- Standard sized panels 4’ 0" or 5’ 0" high, match beam length in width. Stack panels one on top of the other to top of rack system.
- Custom size panels available to fit any rack size or configuration.
- Panels attach directly to rack with mounting brackets.
- Off set brackets allow for load to overhang rack beams.
- Multiple attachment points (seven) on ends of each panel.
- Assembly hardware is inaccessible from the exterior of the partition.
- Panels can be mounted to support posts-if stand alone system desired.
- "Above the Top" mounting allows panels to extend above top rack beam (contact us for details).
- Angle frame design gives installer clear access to hardware, speeding installation.
- Standard 3/8" assembly hardware is the heaviest in the industry.
- System may be started at the floor or at any level where protection is required.
- Heavier options available.
We also offer secure wire mesh enclosures to completely enclose your racks, creating a highly-secure barrier that helps you eliminate pilferage while making your warehouse safer.
Ordering Dimensions:
- RackBack protective welded wire mesh panels are approximately the same width as your rack beam. Order to match beam width; the wire panels are around 6" narrower, to fit between posts.
- Specify the height dimension by matching it to the same height of your rack frame. The wire enclosure is flush with the top of your frames.
- Select mounting option when you order. Utilize flush or offset mount; see below for details.
Mounting Options (select when you order)
Flush Mounted
(LEFT) the rack backing is flush mounted directly to the pallet rack uprights. This provides the tightest possible access. Not even a hand can get through to stored items.
Offset Mounted
Panels mount to the pallet rack upright with an off-set bracket. Off-set brackets from 0"-12" available. With offset mounting, you can overhang pallets from your rack, 1" to 12" (specify when you order).If you have questions about your rack system protection options, contact us.
California Proposition 65
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information – www.p65warnings.ca.gov.
Rack Backing Brochure
(1.03 MB PDF, opens new window)
Wire Mesh Specifications
(60 KB PDF, opens new window)
Rack Backing Installation Instructions
(4.33 MB PDF, opens new window) WireCrafters Full Brochure
(9.42 MB PDF, opens new window)Lead Time: 1 - 2 weeks + transit time
We're here to help you
Cisco-Eagle provides speedy service and expert assistance on all material handling products. If you need help of any kind, please contact us.
- Call Toll Free: 888-877-3861, 7AM-5PM Central Time
- Customer Center: Inquiry forms for fast response
Product Tools
- View Cart
- View Quote Builder - request a quote for any catalog product
About Cisco-Eagle
Downloads & Tools
