Phenolic Wheels are molded from prime phenolic resin compounds with maximum density and strength. Phenolic wheels are constructed from a special water resistant compound that provides excellent service even in wet and cold applications. In addition, Phenolic wheels resist degradation, deterioration, and corrosion from oil, grease, and commonly used acids and solvents. Recommended for all types of floors except resilient tiles. Phenolic wheels should not be towed at high speeds or used on poor floors. They are often referred to as Durastan wheels. Temperature range: -65 degrees F to 275 degrees F continuous; 300 degrees F intermittent.
Raceway Design:
Kingpinless single ball bearing precision machined hardened to 53 Rockwell C minimum. 4-1/4" diameter raceway with 5/8" ball bearings.
Wheels:
Available with either a 1" roller bearing that rotates on 3/4" x 1" x 3-9/16" hardened and ground spanner bushings or 3/4" tapered bearings that rotate on a 3/4" axle
Finish:
Laguna Blue paint
Axle:
3/4" bolt and nut
Mounting Plate Size:
6" x 7"
Bolt Hole Spacing:
4-5/8" x 5-1/2", slotted to 4- 3/8" to 5-5/8"
Mounting Bolt Diameter:
1/2"
Leg Thickness:
3/8" double welded
Mounting Plate Thickness:
1/2"
Temperature range:
-65 to 275 degrees F continuously, 300 degrees F intermittently