Stadium Locker Configuration

Add Security Boxes

Adds a 14-gauge lockable door with a 16 ga side panel. (Lock not included) The door is attached to the frame with a continuous hinge. May be used with a key lock or a padlock.

Add Footlocker

Provides a lockable storage space with a hinged cover that can be used as a seat. There are mini louvers on the front for ventilation. The top can be locked with a padlock.

Select: Continuous Slope Hoods

These fit over the flat tops on new or existing lockers. Sloped Hoods are provided in 72" lengths, and cut to fit in the field. Sloped Hoods rise 1/3 the depth of the locker plus 1", i.e.: 7" rise for 18" deep lockers. A fully dimensioned drawing of the locker layout must be provided to price Continuous Sloped Hoods.

Select: Recessed Trim

Used where lockers are recessed into the wall, and/or where a soffit is placed above the lockers. When recessed trim is used, a gap must be left between the wall and the lockers, and between the soffit and the lockers. This gap should be no less than 1", and no greater than 2". Recessed trim extends 3/8" in front of the wall and the locker. A fully dimensioned drawing of the locker layout must be provided to price Recessed Trim.

Remove Diamond Perforations in locker sides?

Remove from all lockers
Remove from some lockers
If removing from some, how many lockers?

Enter File Location:

FILE TYPES ACCEPTED: .jpg, .gif, .doc, .pdf, .xls, .txt, .zip, .dwg. If you wish to send other file types, contact customer service for instructions. Large files may cause the form to submit slowly.