Wire Enclosures/Partitions: Posts

Components: Panels | Posts | Windows | Gates/Doors

Posts are configured for a standard 3 1/4" sweep-space, and project 2" above the panels. Flush to the floor partitions can be made by modifying the post's standard hole layout.

• Pop-Up Information: Wire Enclosures Hardware

Wire Partitions/Panels Posts:

• Quick Ship sizes: 8'-5 1/4", 10' -5 1/4", and 12' -5 1/4"

• Standard hole layout allows for 3 1/4" sweep-space.

• Posts project 2" above top of panel.

• Standard base plate: 2" x 7" with holes for anchors.

• Special length posts are available to 40'.

• Oversized base plates are available.

• Floor anchors (3/8") are included with your order

Wire Partition Posts are made of 2" x 2" x 14 gauge (.083) steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for floor anchoring, are welded to each. A decorative cap is tack welded to the top. Posts are drilled with 1/2" holes to accept hardware for mounting panels and doors. Hole spacing is set to leave a 3 1/4" sweep space below the panels. Posts have a 2" projection above the panels.

Cisco-Eagle assists our customers with Wire Partitions and Wire Enclosures, to create secure space for storage and work in process. For more information, call Customer Service at 888-877-3861, or e-mail 24hours@cisco-eagle.com.

Material Handling Experts™ are a call away: 1-888-877-3861

Toll free 7-5 CST in the United States & Canada | Inquiries & Support

© Copyright 2008, Cisco-Eagle; All rights reserved. | Privacy Policy

Offices: Dallas, Houston, San Antonio Texas  |  Little Rock, Arkansas  |  Oklahoma City & Tulsa, Oklahoma 

Clients from California to New York, from Florida to Washington - U.S., Canada & Mexico

Cisco-Eagle is Employee Owned, Managed, and Operated | Site Map