Bollard and Post Sleeves - Protectors
Protect your steel posts and bollards with a solid polyethylene layer - you may never paint again
Bumper post sleeves protect
posts and eliminate maintenance.
You won't see any ugly, rusted-dinged, or faded posts once you
protect them.
Eliminate maintenance, increase safety
Protect personnel and machinery with our
Bumper Post Sleeve and Steel Post System. The system consists of an
outer shell constructed of low
density
polyethylene thermoplastic and a steel inner sleeve - this puts an end
to rusting, chipping, pitting, discoloration, scraping, sanding, priming
and painting.
Attractive dome design
The bumper post sleeve has an attractive dome top design preferred by plant engineers. It slides over an existing guard post to give you all day protection for years while virtually eliminating maintenance -- and it looks great for years to come.
Built to last
The LDPE mold mixture contains ultraviolet and anti-static additives to help prevent fading. Clean-up is a snap. Once installed, the durable, chemical-resistant sleeves will withstand extremes of heat or cold. You just don't have to worry about them.
How to order...
-
Measure the circumference you want to cover. (Circumference is the distance around the post.) Most posts are either 4" or 6".
-
Take that dimension and divide by pi (3.14) to receive the pipe size.
Example:
-
Circumference is 21.5". Divide by 3.14. (21.5/3.14 = 6.8471)
-
Pipe size is 6-7/8"
-
-
The bumper post sleeve needed is 6". Always round down.
-
Height: utilize the height of the actual post. Space is built in for the sleeve's dome top, so the relevant measurement is the height of the bollard or post from ground to top.
-
Utilize our online catalog - post protector sleeves area to select the correct size. You can order by telephone or online. If you don't see a size to match your bollards, contact us for assistance.
