High Profile Span Track: Carton Flow Installs on top of Pallet Rack Beams
These tracks install on top of pallet rack beams and can overhang the front or back to maximize the use of linear space. Good for single or double deep racks. Track mounts to beam by use of retainer angle and lock arm. Benefits included extended flow length and full adjustability - front/back, left/right.
High
profile Span Track is typically used in loose-pick applications or where
contouring is preferred. Full-width rollers provide total carton support
and consistent carton flow. The fully adjustable track provides complete
flexibility to slot or re-profile carton flow to match SKU?s. Rollers
are ?? diameter aluminum. Note: in applications with pallet storage
above carton flow, a flush face (no overhang) is required to avoid fork
truck damage to the track while loading and unloading pallets.
Like all Span Track, High Profile carton flow eliminates flimsy carton rails and replaces them with sturdy roller tracks, reducing replacement costs and increasing productivity.
-
Installs on pallet rack beams with simple retainer angle and lock arm
-
Track can overhang beams for increased storage space and contouring of racks
-
Front end of Span-Track acts as a raised carton stop. Rear end of Span-Track has a load bar to withstand impact loading. Both ends feature built-in 2" label holders
-
Available knuckled end, with 15? tilt, angles carton towards picker
-
Full-width rollers provide total carton support and consistent carton flow
|
|
|
High Profile Specifications |
|
|
Product Capacity: |
Up to 50 lbs./ft. |
|
Track Widths: |
6", 9", 12" and 15" (actual track width is ?" greater than nominal) |
|
Track Lengths: |
Unsupported spans from 4? to 10? in 1" increments |
|
Roller Centers: |
1", 2", & 3" |
|
Adjustability: |
1-1/2" O.C. left and right. 2" O.C. front and back |
|
Label Holders: |
Built into track ends (2") |
Retainer Angle
This
is a 14 gauge galvanized member that attaches to the full length of the
front and rear beams. Lock Arm flips over to secure Span-Track into
position in all three planes. This simple open/lock feature enables one
person to easily change, modify or relocate track without tools. Track can
be adjusted front to back, left to right, and can be positioned flush or
overhanging.
Knuckled End
Knuckled
End is available as a high profile section with a 15-degree tilted front
end. Since this angles the carton toward the picker, visibility and
accessibility are improved, making it ideal for loose pick
applications.
The knuckled section is available in three lengths and does not add to overall track length.
|
Knuckle Length |
12" |
16" |
20" |
|
Max. Carton Length |
15" |
20" |
25" |
Call Customer Service toll-free for more information, or elect to submit a Span Track inquiry: Span-Track inquiries. You can check pricing and specification information for many sizes in our High Profile Span Track area of our online catalog.
