888-877-3861

Toll-Free Assistance

E-mail This Page

Subscribe To:

 

Lockers Main

Request A Quote For:

Standard Lockers

Corridor Lockers

Sgl. Point Latch

Multi-Point Latch

Athletic Lockers

Sgl. Point Latch

Multi-Point Latch

All Welded Lockers

Sgl. Point Latch

Multi-Point Latch

HD All Welded Lockers

Sgl. Point Latch

Multi-Point Latch

Stadium Lockers

Locker Information

Lockers: A primer

Specifying Lockers

Locker Comparison Guide

Locker Color Chart

Locker Options & Accessories

Locker Handle Types

Locks

Locker Ventilation Options

Locker Door Options

Do you need to send us a layout drawing?

If you need to provide a drawing to Cisco-Eagle, we can accept any version of AutoCAD files in these formats: DWG, DXF, DWF.

If you have a drawing in JPG, GIF, TIFF, or PDF formats, we can also use these files. Send AutoCAD or digital files to 24hours@cisco-eagle.com

For faxed drawings, send an e-mail to the same address, and we will provide you a fax number for the estimator who will work on your application.

Since room dimensions can not be scaled from faxed, JPG, GIF, TIFF, or PDF files, please include all room dimensions on these drawings.

Penco Vanguard Production Lockers Inquiry Form

Typical lead time is 6-8 weeks + transit time. Lead times may be longer in the summer months.

Inquiry Status

I need more information on these lockers
I am in the budgetary or planning stage at the moment
I need to request the cost to ship these lockers
I need a written quotation for these lockers
I am a contractor quoting lockers as a part of a construction project

Select Lockers

Frames vs. Openings

Locker quantities should be entered as the number of frames required. Each locker represented to the left is shown as one frame.

Starters And Adders

Starters have two side panels, adders have only one side panel, and shares the side panel with an adjacent locker. You will need at least one starter per row of lockers.
Starter
Quantity 		Adder
Quantity 		Type Size
Single Tier Lockers
Double Tier Lockers
Triple Tier Lockers
Four Tier Lockers
Five Tier Lockers
Six Tier Lockers

Do you need ADA compliant lockers? Yes No

The Americans With Disabilities Act (ADA) specifies certain requirements that affect lockers.

  Select Qty

Single tier lockers: the shelf and coat hooks must be lowered to no more than 48" above the floor
Double tier lockers: Only the lower opening of a double tier locker may be used for ADA compliance.

Single and Double Tier: An extra shelf needs to be added to bring the bottom of the locker to no lower than 9" above the floor. In addition, only the recessed handle meets the ADA specifications. See the lock section for an ADA compliant lock.

Triple Tier through Six Tier lockers do not meet the ADA requirements.

When requesting ADA lockers, you must provide both the type and quantity of ADA lockers required. Typically only a portion of your locker requirement will need to be ADA lockers.

Link to federal ADA Requirements page

Do you need 6 inch legs, closed bases, or Zee bases? Yes No

Option Select Qty

6" Legs

Adding 6" legs raises the bottom of the locker off of the floor. This will keep the locker bottom dry in damp environments.

Front Base

(Requires 6" Legs)

Front Bases close off the space between the 6" legs at the front of the locker to keep debris from accumulating below the locker.

Typically one Front Base per frame is specified.

End Base

(Requires 6" Legs)

End Bases close off the space between 6" legs at the end of a row of lockers. This keeps debris from accumulating below the locker.

Typically specified only for the exposed end of a row of lockers.

Zee Base

Zee Bases provide a 4" tall "kitchen cabinet style" toe space below the lockers.

To receive a quotation for Zee Bases, you must provide us with a fully dimensioned plan view layout of your locker requirement.

 ---

Do you require recessed handles? Yes No

Recessed Handles

Optional handle for single tier, double tier, triple tier, two person, and duplex lockers.

This handle consists of a stainless steel pocket and a sound deadening finger lift.

May be used with built in locks or padlocks.

Do you want sloped tops? Yes No

Options

Click on the pictures for a larger view

 Select

Unit Slope Tops

These sloped tops are for new lockers only. The flat top is omitted on lockers with Unit Slope Tops. When these are specified, a taller back and side is provided, with the side mitered to properly fill the end of the slope top.

Unit slope tops rise 1/3 the depth of the locker, i.e.: 4" rise on a 12" deep locker. Unit slope tops are 24 ga.

Continuous Slope Hoods

These fit over the flat tops on new or existing lockers  and provide a cleaner appearance than Unit Slope tops.

Sloped Hoods are provided in 72" lengths, and they are 8 ga., as opposed to 24 ga. for Unit Slope Tops. These sloped tops will need to be cut to fit in the field. Sloped hoods are 1

Sloped Hoods rise 1/3 the depth of the locker plus 1", i.e.: 5" rise for 12" deep lockers.

A fully dimensioned drawing of the locker layout must be provided to price Continuous Slope Hoods.

Will you need locks? Yes No

Options

 Select
Master Lock

Grooved Key Locks

Keyed lock for use with all lockers

Master keying optional
Master Lock

Padlocks

Double reinforced construction with stainless steel outer case and cold rolled steel inner case for strength and durability

Nickel plated hardened steel shackle resists rust

Easy, dependable 3-number dialing with automatic scrambling feature to prevent reopening of lock

Standard black dial

Master keying optional
Master Lock

Built-in Combination

End user registration and control charts provided to secure and simplify administration

Secure, easy-to-dial three digit combination

Longer useful life with five different, pre-set combinations. Easily changed with the touch of a button. Helps maintain security for new students or employees

Master Keys Required

 Yes No

Number Of Master Keys Needed

Coin/Card Operated

Select the operating mode for this lock to the right.

Suited for applications that require security, and an assurance that the keys will be returned.

When the user opens the locker door, a coin must be inserted into the lock to remove the key. When they return, the key has to be used to open the door again and retrieve their stored items.

This lock is available with card activation, coin return, coin collect, or use special tokens.

The lock will fit most lockers, and can be added to existing lockers

Card Operated

Coin Return

Coin Collect

Tokens

Digilock

ADA Compliant lock that opens by touching a Button Key to the lock.

When opened, an LED light flashes and audio indicator sounds.

The lock uses a programming key to set user access and a master key for administrative or management use.

Attach Additional Information

Do you need to attach a drawing, document, picture, or bid spec? Use the file upload system:

Enter File Location:

FILE TYPES ACCEPTED: .jpg, .gif, .doc, .pdf, .xls, .txt, .zip, .dwg. If you wish to send other file types, contact customer service for instructions. Large files will cause your form to submit slowly, so be patient if you are sending files larger than 1MB. For multiple file uploads, utilize ZIP compression to compress them into a single file and then upload that file. Contact us if you need assistance.

Special Instructions

If you have special requirements or specifications not addressed elsewhere, please tell us about them in the space below.

Shipping Information

If you need a freight quote, where will the lockers be shipped to?
City, State, and Zip are all required to get a freight quote
City: State: Zip:

When do you anticipate needing the lockers?

If these lockers are being quoted for a construction project, we can provide a quote taking into account a longer lead time.

How should we reply?

e-Mail Telephone
Your Name