All-Welded Lockers

All-Welded lockers offer superior resistance to hard use and abuse. All body parts are welded into a single rigid unit to resist damage for the life of the product. The backs, tops, bottoms and shelves of each group of lockers are from one piece of steel that spans multiple lockers. The doors are made from 14 gauge steel. Sides, tops and bottoms are 16 gauge steel. Backs are 18 gauge. Lockers with doors 20" high or more are furnished with 3" high extra heavy duty hinges. For color options, see our Locker Color Chart

All-Welded Lockers may be used in conjunction with a number of options.

Since All-Welded lockers are shipped pre-assembled, the time and expense of on-site installation is greatly reduced. This is a great help where labor is either extremely expensive or hard to find. Groupings will be determined by Penco based upon the floor plan layout drawings submitted with the order.

All-Welded lockers are available as standard in ventilated models with diamond-shaped perforations in the doors and sides for maximum visibility and ventilation or with solid door and side construction, with or without door louvers. The perforated models are ideal for heavy duty athletic use where ventilation is important to aid the drying of athletic gear.

Double and triple tier lockers have welded horizontal frame intermediate cross members between the doors for added strength and security. 24" wide doors are one piece, full width. Standard fillers are used when required. Sloped top construction is available as an accessory by ordering sloped hoods, which are field installed.

The Defiant Single Point Latch (SPL) option for All-Welded lockers has extra strength and the low maintenance inherent in a door with no moving parts. It is available with diamond shaped perforations, louvers or as a solid door on 1, 2, and 3 tier lockers. Each door has a patented deep drawn stainless steel handle with integral door pull and extra heavy duty 3" hinges.