Prisoner Holding Cells - Minimum Security
Wire Mesh Secure Cells - Evidence & Ordnance Secure Storage
A woven wire cage is suited for holding cell applications,
provided certain security modifications are made
Style 840 partition system is used to build prisoner holding cells in correctional and detention centers across the country.
Woven wire panel systems are used to build prisoner holding cells in correctional and detention centers across the country. Our modular sized panels can be used to construct nearly any size enclosure.
Generally a four-sided cell with 3’ x 7’ hinged door and ceiling is installed. Two or three sided cells may be installed where existing building walls are secure. If a wire ceiling is not desired, the wall panels may be built to reach the building ceiling.
Holding cells require the assembly hardware to be installed on the outside
of the enclosure. For added security, heavy 3/8” hardware may be brazed,
tack welded, or pinned.
Unique design prevents access to hardware from the secure side of the enclosure. System installs fast with standard hand tools; uses heavy 3/8” assembly hardware. Open but secure design allows free circulation of existing lighting, HVAC, and fire suppression systems throughout enclosure. Heavy duty options available for facilities requiring additional security.
Heavy Duty Options
The system standards may be upgraded with any of the following:
-
Heavier 1-1/2” x 1-1/2” 8 gauge woven wire mesh.
-
Tamperproof assembly hardware.
-
Larger 1-1/2” x 1-1/2” x1/8” steel angle panel
frames.
Locks
Standard mortise cylinder lock, a self-locking device with spring action tongue, can be used in many applications. We also offer a dead bolt style lock, and a high security totally concealed self-locking/ dead bolt lock. Top and bottom slide bolts may be also added to the door. Customer specified locks may be integrated into the system as well.
Benches
Anchorable
10-gauge steel benches may be added to the cell or purchased separately. An
optional 1” diameter handcuff rail may be added for prisoner lockdown. A 1”
diameter steel pipe may be added to the bench for
prisoner lockdown (pictured right). The pipe is securely welded on both ends
and centered 2-1/2” from the face side of the bench. If a full-length rail
is not desired, single forged steel eyelets can be placed at customer
specified positions along the face of the bench.
How to inquire about holding cells
Contact us toll-free or submit a wire partition inquiry form: 1 Wall, 2 Wall, 3 Wall, 4 Wall. Specify that you need a holding cell in your inquiry notes.
