Safety Netting for Conveyors

Various Applications

Conveyor Netting Application form: fill out & submit
Conveyor Safety Netting Online Catalog: Pricing, Specifications, and ordering information. 100% secure.
Pop-Up Information: OSHA Rules relative to conveyor guards

Scroll Down for application examples:

Box-Shaped with offset or flush mounting. Boxed shape guarding protects both sides and beneath the conveyor. When sides are kept close, the guarding can help keep products on the line. If mounted far enough away, product can fall clear of the conveyor for a safe catch in the netting below. Broken cases, small products and falling conveyor parts are caught on the underside, too. FlexGuard height should be at least two-thirds the height of the largest conveyed object.

L-Shaped Guards are designed for conveyor applications that run next to walls. They're supported by cable or angles that run along the overhead supports and are secured to the wall behind the conveyor.

Side Guards. When protection is needed on the sides of conveyors but not beneath, Side Guards can be specified. Generally they are placed flush to the conveyor without offsetting.

Catenary Curve. The catenary curve is used in special applications where other system layouts are not possible. Design considerations should be carefully reviewed for this choice. Contact Cisco-Eagle with your project information.

Horizontal Guard	Horizontal Guards. These guards are used under or between multiple overhead conveyors, or elevated work platforms and mezzanines. We suggest installing horizontal FlexGuard under the entire exposure. In some applications, the open outer perimeters may need side guards. No conveyor guard is designed to protect falling personnel.
Horizontal and Side Guard Combination

Box-Shaped 90-degree Turn	90-degree and 180-degree Turns. FlexGuard can handle any shape, turn or change in elevation, including 90-degree and 180-degree turns. The entire system is designed to be versatile, flexible, and to adapt to any type of conveyor system regardless of the way it's suspended or laid out. Contact Cisco-Eagle with your project information. we can help you configure netting to virtually any kind of conveyor layout.
Box-Shaped 180-degree Turn

Liners for retaining small parts. We provide small mesh liners to catch nuts, bolts washers and other small items--down to 1/8". Liners are normally used in combination with standard FlexGuard.