Controls 2000 (C2K)
 Product Advantages
(Control):
-
Digital
control for Industrial applications (takes into account
current industrial standards.)
-
Open
system with RS232, RS422, RS485 and Ethernet with CAN-BUS
options for extensions.
-
Connection
of peripheral equipment such as printers, bar code readers,
scales, additional displays, alphanumeric keyboards,
monitors, etc.
-
Integrated
host interface.
-
Service
interface for remote service, remote diagnostics by data
transmission and data communications as well as data
back-up.
-
Support
of several access openings by "TRUE" multi-user
operation.
-
Inexpensive
extensions due to modular design.
Operator
Panel (OP 2000):
-
Foil-design
keyboard suitable for industry (IP54), splash proof, dust
proof, abrasion proof, easy to clean.
-
Numeric
keypad and control keys for dialogue with control panel.
-
Large
LC-display with graphic design feature, background
illumination, high contrast, low glare, easy reading.
-
Multiple
languages, language switch over can be effected by operator
while unit is in operation.
-
All
information is in plain text (NO coded information.)
-
Help
functions available while unit is in operation.
-
Automatic
service management (unit indicates automatically when
suggested service date has been reached.
-
The
article storage administration works in multi-user mode,
i.e. with up to four units, or access openings.
-
When
using the optional DB2000 no additional computer hardware is
necessary.
-
It
allows for the operation of the unit via part number,
quantity, FIFO, etc., while maintaining the inventory in the
unit.
Additional
Features (Shuttle only):
-
Continuously
adjustable Vertical lift speed PER TRAY. It is
adjustable from 10% to 100% of its max speed.
-
Continuously
adjustable Horizontal extraction speed PER TRAY. It
is also adjustable from 10% to 100% of its max
speed.
-
Now
faster overall cycle times due to increased
Vertical, Horizontal and empty lift travel speeds.
|
-
Height
detection is now done using a light curtain instead
of photoeyes.
-
Before
and after the extraction of the tray from the access
opening, there is a check to verify whether the
light curtain is clear or not. This is used make
sure all product is safely stored before it is put
into the unit.
-
Each
tray also has the ability to have a pre-reserved
height. If this height is exceeded it will be sent
back to the operator for the height to be reduced.
This is just another option that is available to add
to the already versatile "Fixed",
"Optimized", and "Mixed" storage
modes. These trays with the preserved heights can
also be designated to be optimized or fixed. If they
are fixed they will always go to the same location.
If they are optimized they will go to the location
that will best accommodate the tray at that measured
height. If it is lower than the pre reserved height
it may change locations to better utilize the cube
within the unit. This pre reserved height option
prevents an operator from putting one very tall
product on a tray with many small products. This
scenario would waste a lot of the tray cubic
storage.
|
|
|
|
