Conveyor Accessories: Sorters & Pushers
ProSort 60 (Pivoting Divert Sorter)
The ProSort 60 is a precisely timed flat faced, pivot arm diverter for use with the model SB belt conveyor to deflect cartons across the conveyor belt. Its unique cylinder arrangement allows it to divert cartons at very high rates across the conveyor belt onto the divert chute. Video: ProSort60 (895K MPEG)
ProSort 45 (Pivoting Bow Arm Sorter)
The ProSort 45 is a precisely timed bow arm diverter designed for use with the model SB belt conveyor. The bow is specifically designed for diverting totes into powered spurs. Video: ProSort 45 (685k MPEG File)
ProSort 50/50 (Multi-stage Right Angle Pusher)
The ProSort 50/50 is a multi-stage right angle pusher designed to be used with the model SB for sorting cartons or totes. It's compact telescoping design reduces the mounting space required over conventional inline right angle pushers and increases the cycle rate at which it can operate. Video: ProSort 50/50 Sorter (1MB MPEG Video).
High Speed Pusher
The HSP provides high-speed automatic product diversion. Product may be diverted 90 degrees onto another conveyor, chute, ect. Special two-valve pneumatic control system provides smoother operation at speeds up to 45 cycles per minute. Cycle time varies with weight of product and stroke.
-
Capacity-75 lbs. maximum package weight
-
Stroke Length-14" to 18", 18" to 24", or 24" to 30" ranges
-
Filter Regulator Lubricator Unit
-
Safety air shut-off valve
-
MS-Type floor support (specify elevation)
-
Mounting hardware (specify conveyor model to be mounted to)
Overhead Push-Off
The Overhead Push-Off provides high speed automatic product diversion. Product may be diverted 90 degrees onto another conveyor, chute, etc. or changed from one lane to another in parallel lines. Overhead design conserves space next to conveyor.
-
Capacity-150 lbs. maximum package weight
-
Package height-Minimum 4-1/2" (20" stroke) or
-
6" (30" stroke), maximum is 24" high
-
Push-off can cycle up to 20 times per minute
-
Pusher Stroke-available in 20" or 30"
-
Pusher Face-18" long with 1.9" dia. roller
-
Air Requirements-60 p.s.i. minimum, 125 p.s.i. maximum
