Straight Curves Curved Spurs Straight Spur Acc Conveyor Index
Accumulation Conveyor: V-Belt - Power Accumulating Conveyors
Model 138 ACC & Model 190-ACC Minimum Pressure Conveyors, Straight Sections
-
Conveyor Inquiry Submit to our Conveyor specialists. We answer all requests within a business day.
-
View or download specification sheets: 190-ACC or 138-ACC (PDF Files - Save it to your hard drive by right-clicking and choosing to save rather than to view)
The simplest method ever devised for accumulating cartons, boxes, etc. Basic design eliminates complicated adjustments and allows a minimum of 2% back pressure.
How minimum pressure accumulation conveyor works:
The driving of the tread rollers on minimum pressure conveyor is accomplished with the top surface of a standard section endless flat belt. The strength and wear qualities of the tread rollers and this belt have been thoroughly tested for continuous duty.
To maintain the driving of the tread roller, the pressure roller is mounted in spring-adjusted carriers which sense the required driving friction regardless of the length of the accumulated load. The pressure can be maintained constantly to give a 2% minimum back pressure in either forward or reverse direction.
In the event of extreme changes in the load (weight of box or package), convenient knurled thumb adjusting nuts can be turned to accept a heavier load. This method eliminates the need for selecting proper tension spring holes in trigger mechanisms or jogging cleats on driving belt and eccentric (off center) tread rollers.
By maintaining a constant minimum pressure on the tread rollers, long loads may be conveyed, accumulated, or stopped in the conveyor at any point using very little motor horsepower and giving practically no pressure between boxes or packages.
-
Bed-6-1/2" deep x 12 ga. formed steel channel frame powder painted
-
Motor-1/2 HP standard-3/4 HP available
-
Reversible
-
Center Drive (standard)
-
Floor or Ceiling supported
-
Finger tip snub roller adjustment-no tools required
138 Accumulation Conveyor Models:
-
Rollers-1-3/8" dia. x 18 ga. galvanized tread rollers spaced every 3" and 1-3/8" dia. x 18 ga. galvanized pressure roller spaced every 6"
-
Overall frame widths: 12", 15", 18", & 24"
-
Capacity-Maximum load per linear ft. of conveyor; 100 lbs., not to exceed rated capacities
190 Accumulation Conveyor Models
-
Rollers-1.9" dia. x 16 ga. galvanized tread rollers spaced every 3" and 1.9" dia. x 16 ga. galvanized pressure rollers spaced every 6"
-
Overall Frame Widths: 16", 18", 20", 22", 24", 26", 28", 30", 34", 36", 40", & 42"
-
Capacity-Maximum load per linear ft. of conveyor; 150 lbs., not to exceed rated capacities
