Laydown Device
Conveys box springs from a standing position
The laydown device is used to lower box springs from a standing position
onto a 190-ACC conveyor.
HOW PRODUCT IS CYCLED THROUGH THE UNIT: The product is conveyed onto the
laydown device in the vertical position by means of an inclined 19 RB
conveyor and a UHMW dogbone lined A-frame structure.
Once
the product arrives at the device, the RB stops and the pivot frame is
lowered by air cylinders into a 190 ACC conveyor which carries the box
springs away. Once the product has cleared the pivot frame is returned
to its original upright position in time for the next box springs.
UNUSUAL SPECIFICATIONS:
Because the pivot point of the pivot frame and the box springs could not
be designed at the same location, the cross members of the pivot frame
are constructed of round tubing and one 1.7 OD roller. This will prevent
damage to the box springs and allow the cross members to fit into the
small area between the top of the rollers and the V-belt of the 190-ACC.
For more information, submit a conveyor request or call customer service toll-free during Central time business hours.
