Single Rivet vs. Double Rivet Shelving: Which Do You Need?

Penco Rivet Rite comes in two basic types: Single Rivet (similar to RiveTier Low Profile) and Double Rivet (similar to RiveTier Long Span). These utilize different combinations of beam types. In addition, units for special purposes include Records Storage Units and Automotive Parts Storage.

Double Rivet Bulk Storage Units

• Typical Double Rivet Configuration
• 48" to 96" wide beams
• Access to stored items from all sides
• Choice of beam capacity to meet your storage requirement. Please see: Beam Profiles Page for more detail. 
  • Double Rivet Angle Beam: (Standard Duty): Used to establish unit stability and to provide shelf support on all four sides.
  • Double Rivet Angle Beam: (heavy Duty): Provides stability and increased load capacity in the longer lengths.
  • Double Rivet Channel Beam: Designed to provide maximum left to right stability and higher capacity than standard or heavy-duty beams. Cannot be used at floor level.
  • Use of Center Supports to hold higher capacity loads
• Easy assembly without special tools
• Units available in 84" and 120" heights

Rivet Rite bulky shelving is designed to provide an economical solution for the storage of retail, wholesale or industrial goods. Installation can be done without special tools in a minimum amount of time.

Single Rivet High Density Storage Units 

Single Rivet high density shelving uses single rivet beams on intermediate levels, and double rivet beams at the top and bottom for rigidity. For units up to 48" wide. Single rivet units typically offer less capacity and more accessibility than double rivet units do.

• Typical Single Rivet Configuration
• High Density Shelf Beams provide maximum space between shelf levels. Primarily used as an intermediate shelf support when maximum vertical space between levels is needed.
• Common tee posts between starter and add-on unit
• Shelf levels adjust on 1-1/2" centers
• Fast easy assembly
• Optional heavy duty single rivet shelf beams available for added capacity

Single Rivet beam High Density shelving is designed to provide for maximum vertical clearance between shelves. Access to stored item from all sides is possible because side and back cross braces are not necessary for stability. Add-on units assemble quickly without special tools by using a common tee post between units. Finished in 723 Light Putty baked enamel.

If you want assistance in specifying industrial rivet shelving, a quote, or just a question answered, Cisco-Eagle can help you. Call Customer Service toll-free in the United States.

Order Rivet Shelving Online at our Secure E-Commerce Application.