Conveyors > Belt Conveyors > Model RB Roller Bed > Roller Bed Conveyor, Model RB - 18" OAW, 42' long
Roller Bed Conveyor, Model RB - 18" OAW, 42' long
View Larger Image

Roller Bed Conveyor, Model RB - 18" OAW, 42' long

Roller bed design reduces belt friction and provides greater capacity

SKU: 30.20.18.42

Manufacturer: Hytrol

Roller bed conveyors have a much higher load weight capacity than slider bed conveyors by reducing the friction caused by the belt against the bed surface. This conveyor also has a channeled frame equipped with a single transition roller on the end of the conveyor bed making it easier for you to create long runs of conveyor without having to resize belts or add additional intermediate transition sections.
Inquire
Share

Horsepower

Select a 1 HP motor if you are moving product over the standard 65 feet per minute.

Motor Types

  • Totally Enclosed: A motor enclosure, which prevents free exchange of air between the inside and the outside of the enclosure but is not airtight. This is the standard motor on many conveyors
  • Totally Enclosed Fan-Cooled: Provides for exterior cooling by means of a fan integral with the motor, but external to the enclosed parts.
  • Totally Enclosed Non-Ventilated: Has no provisions for external cooling of the enclosed parts. The motor is cooled by heat radiation from the exterior surfaces to the surrounding atmosphere.
  • Energy Efficient: Energy efficiency motors are specially designed to be more effective at converting electrical input to mechanical output.

  • Support heights listed are measured to top of conveyor bed or roller
  • Supports are required on the discharge end, infeed end, and all section joints
  • All floor supports listed are adjustable and mounting holes are pre-drilled
MS-05-18
MS-06-18
MS-07-18
Adjustble guard rail for conevyor

This guardrail is adjustable up to 6" above the conveying surface.  The rail is a 1-5/8" x 7/8" channel connected to an "L" bracket and bolted underneath the conveyor frame.  All connectors and hardware is included.


$5,137.70

$5,399.15

Options Selected

  • Motor : 1/2 HP. 230 volt - 3 Ph. Totally Enclosed (standard)
  • Floor Supports : 26-3/8 in. to 32-3/8 in.(top of belt)
  • Guard Rail : None

Width

Belt conveyor width is measured in two ways; overall width (or bed width) and belt width.  Overall width includes the width of the frame, which is 1.5" on either side of the belt.  This means that the belt width would be 3" less than the overall width of the conveyor.  Keep this in mind when determining what width of conveyor you need to meet your package requirements.

Length & Supports

Conveyor is available in 7 foot and 12 foot lengths for straight sections.  The length of the conveyor along with the number of supports underneath greatly determine its load capacity.  In most applications, supports should be placed in either 5 or 10 feet intervals depending on the weight of the product you are conveying.  By installing a support every 5 feet, capacity of that section increases greatly.

Shipping

Conveyor is crated and shipped in 7ft and 12ft sections, depending on the overall length of the conveyor, and will need to be bolted together on-site.  The drive assembly, reducer, and motor will shipped attached to one of these sections.  Because these sections are unattached for shipping, the conveyor belt itself will also have to be attached onsite.  Please note that this conveyor DOES NOT include electrical components or switches.

  • Lead Time: 3 days + transit time
  • Belt Width: 12"
  • Overall Width: 18"
  • Bed Length: 40'
  • Overall Length: 42'
  • Belt: Ultimate 140 BBS–Nitrile
  • Bed: 12 ga. galvanized slider pan mounted in 6-1/2" x 12 ga. powder painted formed steel channel frame bolted together with splice plates
  • Center Drive: Minimum elevation 17-3/4".  Chain guard located on left hand side
  • Drive Pulley: 8 in. dia. with 1-7/16 in. dia. shaft at bearings, fully lagged
  • Tail Pulley: 4 in. dia. with 1 in. dia. shaft at bearings or 6" dia. with 1-3/16" dia. shaft at bearings, machine crowned
  • Snub Idler: Adjustable 2-1/8 in. dia. Pre-lubricated ball bearings. Guards included
  • Return Idler: Adjustable 1.9 in. dia. pre-lubricated ball bearings
  • Take-Up: Center drive provides 16" of belt take-up
  • Bearings: Sealed, pre-lubricated, self-aligning, ball bearings on drive and tail pulleys
  • Speed Reduction: Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley
  • Motor: 1 HP–208/230/460V/575–3 Ph.–60 Hz. Totally Enclosed C-Face
  • Speed: Constant 65 feet per minute
  • Supports: MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor
  • Weight: 1395.0 lbs. ea.


pdf logoSpecifications (524KB PDF, opens new window)

; Parts and Installation (Download the ZIP file)

pdf logo10 Ways to Improve Conveyor Productivity (528KB PDF, opens new window)

spec help logo

We're here to help you

Cisco-Eagle provides speedy service and expert assistance on all material handling products. If you need help of any kind, please contact us.

  • Call Toll Free: 888-877-3861, 7AM-5PM Central Time
  • Customer Center: Inquiry forms for fast response

Product Tools

About Cisco-Eagle

Downloads & Tools

Read our customer reviews

© Cisco-Eagle 2019. All Rights Reserved

View wishlist

Shopping Cart: 0 Items

Your shopping cart is currently empty.
Discounts:
Total:
View cart

Your Quote: 0 Items

Your wish list is currently empty. This is the topic Named: emptywishlisttext. You edit this in the ADMIN site.
View Quote Builder Move all to Cart
Total:
Loading...