Floor Level Lift & Tilt, 50" x 48" Platform, 2000 lb. Cap.

Raise and tilt loads for more ergonomic access

View Larger Image

SKU: PRST-XZT50-20

Manufacturer: Presto

Position heavy loads at an ergonomic height and angle to reduce the need for bending and reaching during work processes. The lift platform lowers all the way to floor level so you can load or unload it easily with a pallet jack or hand truck; there's no need for workers to wait for a fork truck operator.

Specifications

Platform Size: 50" x 48"
Capacity (lbs.): 2000
Lowered Ht.: 3/8"
Raised Ht.: 33-3/8"
Maximum Tilt: 30º
Lifting Time: 40 sec
Footprint: 74" x 61"
Motor: External 1 HP
Weight: 1420.0 lbs. ea.

Description

Great for heavy containers, skids, or pallets you need to hand load and unload. With a 30-degree tilt, it can present heavy crates of parts or inventory to workers for best practice handling. One reliable power unit controls lift & tilt so there is less maintenance, but the two functions operate separately with an easy-to-use standard pedestal control. Lift is equipped with a remote power pack that is hydraulically connected at the factory. Be sure all hydraulic reconnections are made according to the operations manual when you install the lift.

If usage is more than one full lift every four minutes or jogging action every ten seconds, motor will overheat. Optional external power units available for continuous running and increased lifting speed.

Load tilting is a great ergonomic solution for work positioning, but be sure it's appropriate for the type of load you're handling. Depending on the load's composition, size, weight, and center of gravity, tilting may not be suitable beyond a certain angle. Contact us for help determining which lift & tilt model is right for your facility.

California Proposition 65

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information – www.p65warnings.ca.gov.