Your shopping cart is currently empty.
85 Series Dual Casters with Omega Wheels
Better load distribution and impact absorbing wheels
Get Quote- Kingpinless single ball bearing precision machined raceways
- Axles: 3/4" bolt and nut for 3" wide, 1" or 1-1/4" bolt and nut for 4" wide, 1-1/4" bolt and nut for 5" wide
- Finish: Laguna Blue
- Mounting Plates: 6" x 7"
- Bolt Hole Spacing: 4-5/8" x 5-1/2", slotted to 4- 3/8" to 5-5/8"
- Mounting Bolt Diameter: 1/2"
| Rigid | Swivel | ||||||
| Roller Type | Wheel Size | Overall Ht. | Cap. (lbs.) | Model No. | Price | Model No. | Price |
| Straight | 8" x 3" | 10-1/2" | 3200 | 2-85-UOR-0830-R | $658.28 |
2-85-UOR-0830-S | $1,128.01 |
| Straight | 10" x 3" | 12-1/2" | 4000 | 2-85-UOR-1030-R | $727.39 |
2-85-UOR-1030-S | $1,197.12 |
| Tapered | 10" x 3" | 12-1/2" | 4000 | 2-85-UOT-1030-R | $634.10 |
2-85-UOT-1030-S | $1,103.83 |
| Tapered | 8" x 3" | 10-1/2" | 3200 | 2-85-UOT-0830-R | $582.73 |
2-85-UOT-0830-S | $1,052.50 |
Omega Wheels
The Omega wheel can eliminate the need for spring casters. It achieves its high capacities and enhanced impact-absorbing ability with a patented web/spoke design. It flexes to cushion the load then rebounds to original shape. Resists tearing and chunking, and won't pick up metal chips.
Straight Roller Bearings
Straight roller bearings consist of a cage-type roller assembly and a split outer race. These bearings turn on hardened and ground spanner bushings which provide a long wearing precision inner race. Press fit combination metal retainer/thrust washers hold the bearings in place. Straight roller bearings have a high radial capacity, but minimal side thrusting load rating.
Tapered Roller Bearings
Tapered roller bearings are true precision bearings designed for the heaviest loads, and/or high-speed operation. In addition to great radial capacity, they have a side thrust load rating of 60% to 90% of radial capacity rating. The assembly consists of an outer race or cup and a tapered cone roller assembly held in position with closures. Spacers are provided to tighten the caster legs against the bearing assembly. Two bearings are installed per wheel.
