Model No. | Wheel Type | Wheel Size | Caster Type | Cap. (lbs.) | Overall Ht. | Price | ||
---|---|---|---|---|---|---|---|---|
D-249-CI-R | Cast iron | 4" x 2" | Rigid | 800 | 5-5/8" | $22.26 |
|
|
D-249-CI-FS | Cast iron | 4" x 2" | Swivel | 800 | 5-5/8" | $24.62 |
|
|
D-249-CI-FS-B | Cast iron | 4" x 2" | Swivel w/ brake | 800 | 5-5/8" | $33.12 |
|
|
D-259-CI-R | Cast iron | 5" x 2" | Rigid | 1000 | 6-1/2" | $23.30 |
|
|
D-259-CI-FS | Cast iron | 5" x 2" | Swivel | 1000 | 6-1/2" | $25.66 |
|
|
D-259-CI-FS-B | Cast iron | 5" x 2" | Swivel w/ brake | 1000 | 6-1/2" | $34.16 |
|
|
D-269-CI-R | Cast iron | 6" x 2" | Rigid | 1200 | 7-1/2" | $29.10 |
|
|
D-269-CI-FS | Cast iron | 6" x 2" | Swivel | 1200 | 7-1/2" | $31.46 |
|
|
D-269-CI-FS-B | Cast iron | 6" x 2" | Swivel w/ brake | 1200 | 7-1/2" | $39.96 |
|
|
D-289-CI-R | Cast iron | 8" x 2" | Rigid | 1200 | 9-1/2" | $36.88 |
|
|
D-289-CI-FS | Cast iron | 8" x 2" | Swivel | 1200 | 9-1/2" | $39.24 |
|
|
D-289-CI-FS-B | Cast iron | 8" x 2" | Swivel w/ brake | 1200 | 9-1/2" | $47.74 |
|
Model No. | Wheel Type | Wheel Size | Caster Type | Cap. (lbs.) | Overall Ht. | Price | ||
---|---|---|---|---|---|---|---|---|
D-249-CI-R | Cast iron | 4" x 2" | Rigid | 800 | 5-5/8" | $22.26 |
|
|
D-249-CI-FS | Cast iron | 4" x 2" | Swivel | 800 | 5-5/8" | $24.62 |
|
|
D-249-CI-FS-B | Cast iron | 4" x 2" | Swivel w/ brake | 800 | 5-5/8" | $33.12 |
|
|
D-259-CI-R | Cast iron | 5" x 2" | Rigid | 1000 | 6-1/2" | $23.30 |
|
|
D-259-CI-FS | Cast iron | 5" x 2" | Swivel | 1000 | 6-1/2" | $25.66 |
|
|
D-259-CI-FS-B | Cast iron | 5" x 2" | Swivel w/ brake | 1000 | 6-1/2" | $34.16 |
|
|
D-269-CI-R | Cast iron | 6" x 2" | Rigid | 1200 | 7-1/2" | $29.10 |
|
|
D-269-CI-FS | Cast iron | 6" x 2" | Swivel | 1200 | 7-1/2" | $31.46 |
|
|
D-269-CI-FS-B | Cast iron | 6" x 2" | Swivel w/ brake | 1200 | 7-1/2" | $39.96 |
|
|
D-289-CI-R | Cast iron | 8" x 2" | Rigid | 1200 | 9-1/2" | $36.88 |
|
|
D-289-CI-FS | Cast iron | 8" x 2" | Swivel | 1200 | 9-1/2" | $39.24 |
|
|
D-289-CI-FS-B | Cast iron | 8" x 2" | Swivel w/ brake | 1200 | 9-1/2" | $47.74 |
|
Cast iron wheels are exceptionally long wearing. They have tremendous resistance to shock and are a good choice for high capacity loads in warehousing and manufacturing. Recommended for rough concrete, wood block, and littered floors.
Ductile steel wheels have very high weight capacities, heat resistance, and tensile strength, making them nearly unbreakable— even under shock loading and other exreme conditions. They should not be used on expensive factory floors or other protected surfaces, as they are likely to cause deterioration.
Phenolic wheels provide excellent service even in wet and cold applications. They resist degradation, deterioration, and corrosion from oil, grease, and commonly used acids and solvents. Recommended for all types of floors except resilient tiles.
TPR wheels combine the durability of hard-tread wheels with the quiet floor protection of soft-tread wheels. They are made of thermoplastic elastomer, permanently bonded to a polypropylene core. They are non-marking and resistant to chemicals, acids, bases, alcohols, salts, and steam.
Capacities rival those of steel wheels. Careful attention is paid during the bonding process to assure that each wheel meets high performance standards. UI wheels are non-marking and resistant to abrasion, chemicals, and oil. These wheels will typically outlast rubber wheels.
V-Groove wheels are machined with a 90 degree groove for operation on inverted angle iron track. They are used to control the flow of a load (into an oven, between machines, over long distances, or where "production line" sequences must be maintained.)
Alternative top plates are available. Contact us for assistance.
1-866-443-5648
© Cisco-Eagle 2025. All Rights Reserved