"Warning where you need it with no sensors to configure. Manual gates use AisleAlert technology to detect pedestrians crossing into the forklift traffic lane and trigger an LED strobe light plus an audible alarm to warn forklift drivers of crosswalk traffic. These are high-cycle gates that will last many years. For help with your pedestrian safety program, call us or click to ask for help today. "
Susan, Employee-Owner Since 2010
Safety Specialist
AisleCop High-Duty Cycle Pedestrian Gate - 40" Opening w/ Hinge PostA high-duty cycle pedestrian gate with dual stop signs helps make pedestrians more aware that they are about to enter a hazardous traffic area. Users must visually scan the danger area to make sure the path is clear then push the gate open in order to enter the crosswalk; gate automatically swings shut. Mounts to included hinge post. Factory tested prior to shipment.(read more...) $1,200.00 |
|||
AisleCop Manual Pedestrian Safety Gate with AisleAlert Detection, 40" OpeningAisleAlert safety gate detects the passage of pedestrians and triggers a bright, highly visible, LED strobe light and audible alarm to help alert forklift operators. The sturdy high-duty cycle gate, built for constant daily use, easily pushes open and swings closed. The 90" high alert strobe is at eye level for forklift operators, making it easier for drivers to spot. Adjust the strobe duration from 15 seconds to 1 minute by turning a knob; you can also adjust the audible alarm between 62 and 92 decibels or disable it. Guard rails not included. Custom sizes available upon request. Many types of installations with remote sensors and interconnected gate systems are possible with AisleAlert technology. Factory tested prior to shipment.(read more...) $2,398.88 |
|||
Manual gates automatically detect a pedestrian crossing into the forklift traffic lane and trigger an LED strobe light to warn forklift operators of pedestrians in the crosswalk.
The Manual Gate System is fully tested at the factory before being shipped. Set up the system right out of the box with some assembly required, plug into electrical power and begin using. The flashing light duration is easily adjusted using the adjustment control button for longer or shorter warning time cycles.