Horizontal drag chain conveyors transport pallets with bottom deckboards oriented perpendicular to the direction of travel. With total capacities up to 6,000 pounds and frame widths up to 104-1/2", they are ideal for handling heavy pallet loads.
Conveyor models DC-62, DC-63, DC-82, and DC-83 all feature modular assembly, with each conveyor including drive, intermediate, and tail sections on which continuous chain strands travel, driven by a common drive shaft. Diamond plate decking is standard, and all models are compatible with adjustable DCS and DCDS floor supports.
Model DC-62
The DC-62 is a two-strand drag chain conveyor that uses #60 single-pitch chain travel.
- Frame Construction: 6" x 7 ga. formed steel angle with 1-1/2" x 3/16" wall, chain support tube; 4 ga. formed coupling channels at infeed and discharge end of each module; powder coat finish
- Frame Widths (Strand Centers): 19-7/8" (18"); 22-7/8" (21"); 25-7/8" (24"); 28-7/8" (27"); 31-7/8" (30"); 34-7/8" (33"); 37-7/8" (36"); 40-7/8" (39"); 43-7/8" (42"); 46-7/8" (45"); 49-7/8" (48")
- Length: 7' plus additional for intermediate modules
- Chain: Two strands #60 single-pitch chain with UHMW polyethylene chain guides
- Motor: 1-1/2 HP
- Conveying Speed: 35 FPM
- Maximum Drive Capacity: 6,000 lbs. @ 35FPM
- Maximum Unit Load: 3,000 lbs.
Model DC-63
The DC-63 is a three-strand drag chain conveyor that uses #60 single-pitch chain travel.
- Frame Construction: 6" x 7 ga. formed steel angle with 1-1/2" x 3/16" wall, chain support tube; 4 ga. formed coupling channels at infeed and discharge end of each module; powder coat finish
- Frame Widths (Strand Centers): 37-7/8" (18"); 43-7/8" (21"); 49-7/8" (24"); 55-7/8" (27"); 61-7/8" (30"); 67-7/8" (33"); 73-7/8" (36"); 78-7/8" (39"); 85-7/8" (42"); 91-7/8" (45"); 99-7/8" (48")
- Length: 7' plus additional for intermediate modules
- Chain: Three strands #60 single-pitch chain with UHMW polyethylene chain guides
- Motor: 1-1/2 HP
- Conveying Speed: 30 FPM
- Maximum Drive Capacity: 5,800 lbs. @ 30 FPM
- Maximum Unit Load: 3,000 lbs.
Model DC-82
The DC-82 is a two-strand drag chain conveyor that uses #80 single-pitch chain travel.
- Frame Construction: 6" x 4 ga. formed steel angle with 2" x 1/4" wall, chain support tube; 4 ga. formed coupling channels at infeed and discharge end of each module; powder coat finish
- Frame Widths (Strand Centers): 26-1/2" (24"); 29-1/2" (27"); 32-1/2" (30"); 35-1/2" (33"); 38-1/2" (36"); 41-1/2" (39"); 44-1/2" (42"); 47-1/2" (45"); 50-1/2" (48"); 53-1/2" (51")
- Length: 7' plus additional for intermediate modules
- Chain: Two strands #80 single-pitch chain with UHMW polyethylene chain guides
- Motor: 2 HP
- Conveying Speed: 30 FPM
- Maximum Drive Capacity: 5,800 lbs. @ 30FPM
- Maximum Unit Load: 4,000 lbs.
Model DC-83
The DC-83 is a three-strand drag chain conveyor that uses #80 single-pitch chain travel.
- Frame Construction: 6" x 4 ga. formed steel angle with 2" x 1/4" wall, chain support tube; 4 ga. formed coupling channels at infeed and discharge end of each module; powder coat finish
- Frame Widths (Strand Centers): 50-1/2" (24"); 56-1/2" (27"); 62-1/2" (30"); 68-1/2" (33"); 74-1/2" (36"); 80-1/2" (39"); 86-1/2" (42"); 92-1/2" (45"); 98-1/2" (48"); 104-1/2" (51")
- Length: 7' plus additional for intermediate modules
- Chain: Three strands #80 single-pitch chain with UHMW polyethylene chain guides
- Motor: 2 HP
- Conveying Speed: 30 FPM
- Maximum Drive Capacity: 6,000 lbs. @ 30 FPM
- Maximum Unit Load: 4,000 lbs.